Hi,
We have a SBS server (PDC, DNS, DHCP) with 2 NIC's
LAN IP: 192.168.1.10
Subnet: 255.255.0.0
Gateway: blank
DNS: 192.168.1.10
WAN IP: 192.192.1.11
Subnet: 255.255.0.0
Gateway: 192.192.1.1
DNS: 192.168.1.10
Router/Modems IP : 192.192.1.1
Subnet: 255.255.0.0
We have our IP Phones with the following address:
IP: 192.168.4.x
Subnet: 255.255.0.0
Gateway: 192.168.1.10
DNS: 192.168.1.10
We have our Switchvox PBX which has one NIC with:
IP: 192.168.4.250
Subnet: 255.255.0.0
Gateway: 192.168.1.10
DNS: 192.168.1.10
Basically our setup looks like this;
MODEM/ROUTER (NAT) ------SBS Server WAN NIC-----SBS Server LAN NIC-----Network Switch
| |
| IP Phones/PABX
|
|
|
Workstations
The problem is that with our Workstations, they cannot access the PABX system, only if they change there IP to 192.168.4.XX.
Does anyone have any suggestions?
Cheers
Start Free Trial
