Top Solutions

iam trying to deploy cisco  wired 802.1x port-based authentication with ms IAS 2003 and  cisco switch 3550  using PEAP as EAP type,  unfortunately for some reason , i am not able to authentcaticate , below is my configuration  on cisco and the...

What are the Advantages of OS/2?2-0

My OS/2 computer is connected to a LAN, which is connected
to the main campus server by a T1 line. I need to connect
to a drive on the main server. Others on my LAN can do so
in Windows 95 by the following process:

Push START
Go to Programs...

Probelm: Can not logon to "domain A" from "domain B" over TCPIP network.
Need a step-by-step MPTS setup procedure to get "NETBIOS over TCPIP" to work.

Are SO_RCVTIMEO and SO_SNDTIMEO valid options on setsockopt under OS/2 ?
If not, is there anyway to set the timeout values. BSD seems to allow
this as well as some winsock implementations. TIA

Roy Berger
rberger@mctinc.com

I keep getting the error "The system detected a possible attempt to compromise security."  Then I couldn't access our network drive.  I have set our DNS to our specific DNS address.  Any thoughts??  

Hi,

I am trying to simultaneously dial-up into 2 different Thin Layer servers (Axis Video Server: for remote surveillance) from a one PC.

These video servers have got different IP addresses, different user name & password, different Host...

When you use IBM Client Access software to access an AS/400 you are prompted for signon for Iseries before you get to the green screen signon screen.  In essence, you are signing on twice.  When you use other 5250 emulation software, the first...

hello all

this problem has me absolutely stumped, hope you guys have some idea of what's going on because i've run out of ideas and have exhausted googles and EE's solutions to no avail.

Setup as follows: Parent PDC: Win2k8 x64 standard,...

Hi

I have Cisco 3600s and I want to block Netbios ports (ns, dgm, ss) over my WAN network (frame-rely)on subinterfaces. I have tried a several rules, but cannot seem to get one works right.

Any suggestions would be helpful, but I would...

We have a content management solution based on php. We have restricted multiple logins using sessions management. We would however want to introduce machine based logins.

How can this be done?

Thanks in advance.

From what I have read, MIM attacks facilitated by ARP poisoning is easy to do if you are on a company LAN or sharing a wifi access point.  Some stuff I have read says VPN protects data from sniffers on wifi networks.  Since MIM attacks intercept...

Hi,

I want to restart TCP/IP remotely, Is it possible to write a script to do this.

-----------------------------------------------
endtcp
WRKCFGSTS Vary Off the RCYPND eth line
Strtcp
STRHOSTSVR *ALL...

Dear Experts,

I have a situation when i have a VPN from some company like www.purevpn.com.

What happens is when i am connected with VPN, by default all my applications like browsers, messenger etc everything takes the VPN path. What i want...

does anyone knows a link to download Cisco unified presence 7 and cisco unity connection 7.I tried so many torrents and check website but without success.

pls advise

I would like to clone a network environment that exists at our work place. Our network has a Domain, 3 VLANs, 3 manageable HP switches, VMware and standard servers that are running server 2003, Exchange. We also have FTP Linux server (which I...

Hello,

I m looking to install an .exe file with a batch file silently. What Cmds should I use?

Need some clarification for  the Group Policy on Loopback Processing Mode (on AD environment )  .

(1)
This Policy is apply to USER OBJECT ,or, COMPUTER OBJECT ?
Say we have 2 separate OUs , 1st OU contain User Objects and 2nd  OU contain...

Hi All,

Can someone help me please I need a simple config file for my switches so that all the computers can get their IP from the Switches and go to the internet. I don't need any separate Vlan for voice or data.

My IP is 190.224.12.5.
...

I've got a Windows 7 laptop that is not joined to a domain that is having issues w/ the firewall.  I've having an issue w/ connecting to a VPN and I wanted to look at the firewall settings.  When I go to do so, there is a message that says:
...

I wanted to harden XP - Professional Operating System. The purpose is to reduce the operating cost for IT Team. Becuase to manage 1000+ computers are difficult and customisable software won't require any monitoring system.

Let me know your...

Hi All,
I am trying to log in to a XP Professional computer of a friend to clean off business files and prepare for sale. My problem is, that there is no domain to log into now. It won't allow me access by either "Admin" or User name with...

I can no longer setup a VPN connection from a remote location.  The only way a computer can connect to our server is that a computer needs to be connected within our company network.  So our laptop can no longer connect when they are off site...

I want to understand the Cached Credential  and need the Expert  help to clarify my understanding .  

Please answer my understanding and questions  one by one :-

(1)
There are 2 types of cached credential (a) local cached credential ( for...

Hi Experts,

I need to buy a SAN/UCC certificate for my Exchange 2010. Does anyone have a step by step procedure to follow on how to perform and request this certificate for my Exchange 2010 box?

Thanks

Hi,
I have my main default Domain Policy set for screen saver to 60 min.
I have OU that I want to be 120 min. but I don't want to redo all the password policies I have set in the default Domain Policy again.
How can I create another policy...

Full error message:  Generic Host Process for W32 service has encountered a problem and needs to close.  We are sorry for the inconvenience.

I am getting this message on a Dell inspiron laptop at work.  When the message appears the user loses...

I'd like to have server #2 be a backup DHCP to server #1 (both W2k3 Standard and only one domain). Which is the best way of doing so?
80/20 or plain and simply set up both with identical scopes and enabling address conflict detection?

I have a server 2003 network with Windows XP clients.  After successfully adding a workstation to our domain, the workstation's ip address shows 10.0.0.3.  The workstation shows up in the Active Directory.  It also shows up in the DNS console but...

When setting up a new computer ( OS 7 Pro) to join the domain I get  a Login error:
Target Name is Incorrect this has happen on XP computers too. Have  Windows Server 2008.
How do I solve this issue?

Hi

The first question is this:
Can I run TCP/IP on two NICs and have the same IP adress on both cards?
If so...how is this done (detailed instructions please)?

(I have tried installing TCP/IP protocol to both adapters and everything just...

Hi everyone, how do we know how secure our network is? We just let go of a disgruntled IT employee who manages our network and we're concern that he has our static ip, and we're not sure how safe is our network. Is there a test we can do to see...

Server 03, 32 Bit trying to deploy IE7 group policy to 64 bit windows xp.  The policies dont apply.  Any ideas.  

I keep getting this warning when I try to open hyperlinks that point to my USB storage drive.  I put these links in my tasks so I can open a Word document.  I have gone into Trust Center and turned off Macro Security.

  We have some user required admin right to RUN the Software . but same time he breaks some
 Security policy . We want prevent them to installed any software .
only local admin can installed the software.

Can you have 500 hosts on one subnet?and what class would you put this into ?

Hi !

We have about 100 2008 R2 servers (stand alone NO AD or Domains). I have create local group policy in one server and I need to copy the same group policy to the rest of the servers. all have same OS and users acounts. the policy will...

Ok. I know that I have a working TCPIP network. I have sygate running (similar to nat2000). And the OS2 machine can see the internet fine. It can ping, get websites, resolve names, etc. But I want to now have file sharing. From the get go, the...

Does anyone know how to script a couple of changes in group policy?


Why?...
These machines are currently running in a novell enviroment. We have about 700 machines we are eventually planning to migrate to AD but we need to update the group...

We have a application that we have used for years.  The company updated the software using the soap protocol.   The day they put the release out, we have been unable to connect.   Our proxy sits on a 400 and a pics firewall.   We questioned the...

How do i have to setup Putty so i can ssh to a server, even if i'm behind a proxy.
my only open ports are 80, 443 and 5900. I've moved the ssh deamon on my remote server on 5900 port, but i don't know how to setup Putty. please help!

My server can ping other file and application servers.  However, it cannot ping its own IP and router.  I have MPTS and TCP/IP v.3 running on OS/2 Warp Connect 3.0.

Dear EE Members

I want to build a UTM Software which just like any ordinary firewall, can anyone give any direction, in this.

Regards

where can I get a "generic" ne2000 driver for W95

I have a 3600 Series router which has an OS of 11.0 version and I want to upgrade it to version 12. Please guide

I had a server say called jane.  I replaced it with a new server and called that server jane.  I tried to dcpromo the first jane but would not.  I took it down, upgraded to win2k3 and then dcpromo/forceremoval which gave me a member domain.  I...

Can I replace the android os with wm 6.5 on the Samsung moment? If so, how?

Hi, I have a wireless network from a long time ago and I have't been using it for a long time, I forgot the passcode web key and also forgot the network name, and there are about 21 wireless network within the reach.  

So I tried to go in to...

I would like to Stop telnet running from dos prompt using group policy.
I can stop it runnng if it is executed from RUN on XP using group policy.
But if telnet is run from within a dos prompt the telent program is run

Hi,

Can people give me some advice on the best file encryption software out there. I know there are loads of them some free and some not, How good are they actually???

Do some of them have back doors to decrypt info etc??

Is any...

Before I purchase Static Public IP Address for my VPN Connection , I want to know whether the following setup will work ?

VPN Client workstation and VPN Server is separated by Internet.

Both VPN client site and VPN server site are using...

How do you enable hosts file on OS/2 Warp 4.  What directory you put it in.  is c:\tcpip\etc?  How can you save the file in ASCII.  I know that it prompt you to save the file either in text, OS/2 command prompt, or DOS command prompt.  Any...

I am trying to get a dump of all my objects in the group policies in active directory to a file file with their v
current values. So I can review them and make proper changes.

Hi everyone,

Can anyone tell me if there is a way to deny a specific user on a Windows Small business server 2003 network, access to the internet ?  Would this option be in a GPO setting ?

Thanks,
Frank

I read the article make a very good summary ( as shown below ) , mostly can understand but I am confuse on  " permission of access resources across domain and within same domain "

Article quoted :
(1) GLOBAL GROUP :-
Members of Global Group...

Hi

We are having 7 server of which one is exchange server i have installed spiceworks on this server. Now we have norton antivirus corporate edition where all the scanning is done. Some how when we are trying to access this file it is taking...

We connected a new Samsung HDTV to our Dish Receiver via the HDMI cable.  The Receiver and TV are now fried.  To my knowledge, no electical current of consequence should be flowing through this connector.  No one seems to no what happened.  But...

Whats the difference a client (browser) and Web server by describing the functionality of the OSI reference model

I need to get a win98 machine connected to an OS/2 peer network. How or what do I neeed to setup the win98 machine to do this? I know the cables and cards are all good because when I boot to connect it all works, But I cannot get 98 to see any...

I am attempting to share files located on an OS2 Warp 4 workstation. I have shared the directory and give all users full access. I have made sure the Requestor service is running, and that the OS2 workstation is logged on to the LAN.

In the...

I have about 15 computers on a domain environment.  Right now all users are getting prompts to install updates or to wait to install updates.  I would like to set up a GPO so that all updates get installed every night and it doesnt prompt the...

I am trying to connect to the internet with OS/2 Warp 4, a supported 3com card, a cable modem connected to an SMC wireless access point.  OS/2 is loading the nic driver fine, I've enabled DHCP in the TCP/IP settings.  However when I start up my...

Can you make an account "mail box" that works like a mailing list where you have a single user email address that will forward to other email accounts. Like a list server.

I'm trying to set up a network between warp and NT 4.0

So far I've got the ethernet cards installed and they do work running os/2 - os/2 peer2peer.

I've changed the NT workstation name to "IBMPEERS" and the NT machine *DOES* see the OS/2...

I've been looking through the web and the black book for SBS 2003 to find out about remote connection and who's connected and is currently connected to the server. Did not find what I was looking for.

How do i find out who connected to my SBS...

Hi - I have been trying to find the most secure desktop remote software - I need to access my home PC from Work - so far logmein free seems like a great deal.

Not sure if there is a catch to it being free.

Looking for the best value and...

Hi,
I am using Windows 2008 GPO policy. Around 50 client pc is connected this policy. I have plan to implement disable usb port policy for only 10 clients remaining 40 client  is not affacted this policy, but i have deploy new policy all 50 user...

I have two pc's capable of running NT

or OS/2. Under nt, tcp runs fine (ftp &

telnet) Under os/2 I  can use ppp  and
everything works. With ppp down, I  can
ping myself, ftp to myself, telnet to
myself, etc. I cannot ping from an os/2 ...

Hi

I have a SBS2003 server and have just set up RWW.  I would like to keep relatively simple passwords for internal staff with no external access and a complex set for remote workers.  From what I understand there can only be one password...

I originally had installed a licensed version of OS/2 Warp 3.  Early last year I updated this to Warp 4.

After successfully linking to the internet via TCP/IP I did something (I've been fiddling again) which resulted in me being unable to...

My router is Speedtouch router. I forgot the password. can u help me to find the password. if i reset i have to configure all the ISP username and password? Can u help me.thx

I'm setting up an HD to be used as an image for our constant new employees. I'm wondering if it is possible to map printers, set up task scheduler tasks to run maintenance scripts..also set up word templates and browser configs...so that once I...

I have a WIFI access Point connected to by wired DSL Router, a linksys BEFSX41, about 100 devices connect to it, blackberries, iphones, computers etc. Usually not much data is downloaded, mostly users use it to connect to email or surf online. No...

I have a Warp v4.0 system and on the PC I have a 3COM 509B
(ethernet 16bit) card installed. I cannot make "net start req" to work! I have a message stating that something is
wrong with the cable, which is untrue because I can ping
through the...

G'day Experts.
I've trawled your forum looking for some help (hey it took alot to admit I needed it).
A number of people have asked the same question and a variety of answers have been posed, none of which have helped me and thus I ask the old...

Can someone explain a little bit the usage of Netbios.
1- when you rename a host name are you giving it a Netbios name?
2- when you right click computer/properties/computer name tab, you can change the computer name there, is this netbios name?...

while trying to accesss RHEL4 through VNC, Linux box is asking whether to allow or deny connections. can we disable this interactive acceptance of vnc connections on my RHEL box and make it login directly...

problem is every time i ws trying...

Hey Guys,

I have a router, it does not have cisco security device manager installed on it, but I am using the program to edit the banner.  When I try to type or copy and paste in the Window to change the banner (Additional Tasks --> Router...

Hi there,

I have 2 XP Pro machines that used to share a workgroup on a LAN and now have been seperated, - i having been moved to a remote location. I would like them to once again be able to share info in a workgroup by joining them with a...

we have a lab with 18 emacs and they work great and the students can log into any of them (save one!)
for some reason it will only allow an admin or someone with an account on the computer to login, the students accounts are kept on a windows...

Hi Experts,

One of my clients is asking for some web filtering software for his machines.

He would like some software that is managed in one place, rather than seperate installations that must be managed on all machines individually.

The...

Hi guys,

Can Group Policy be used to automatically log off a user and close any open applications based on a specific amount of inactive time?

Thank you!

hey all, i am an IT Trainer who just landed an interivew for IT security training this coming Wedenesday. I was looking for some brain dumbs or Q/A for this technical interview. My security info is not all that deep.
all I found was on tech...

I have to design a Highly secure Local Area network of 35 systems.

There have been data theft issues arising from internal staff and I need to address this problem. I have a tight budget and hence looking for Free or reasonably priced...

I have two sites with 2 different WAN connectivity between them. The WAN connections are terminated on the same routers at each sites. There is requirement to send some class of traffic through 1st link and the rest through the 2nd link. if the...

I'm looking for doc. on LMU Return Codes (RC) and LMU error messages typical LMUxxx - where xxxx is an error code - can anyone help me?

I'm especially interested in the LMUFIND command - but any doc. of LMU is welcome!

I need these RC's for...

Hi!
I'm using 5 OS/2 Warp 4 machines (with latest TCP/IP fixes, with or without FP 7) and 1 Windows NT 4.0 Server (FP 3) in an Ethernet network. I installed the File and Print services and Netbios over TCP/IP as network protocol on the OS/2...

I have been developing NDIS3, NDIS4 drivers for MS Windows. However, I will like to expand my driver support for the OS/2 land. Can anyone help me with the following questions?
(1) What is the development environment to write a NE2000 NDIS2...

I'd like to know about the Network+ prometric exam.  I'm taking it in January and would like some info.  How many questions?  Did it have a focus on any particular topics ? etc.  I know this isn't technical but I know if I'm going to get answers...

How do I randomly select 4 different social security numbers from an excel spreadsheet?

I have an OS/2 Server.  Our network is laid out with an OS/2-based token-ring segment and an NT 4.0(SP3)-based Ethernet segment.  I am trying to get a token-ring card and an Ethernet card running in this machine.  I have the token-ring card set...

I need to run TN3270 on OS/2 Warp 4 via dial-up TCP/IP.  The TN3270 client that comes with Personal Communications 4.1 (entry level) is great, but will it work via dial-up? If so, how? If not, is there another TN3270 client that will work under...

I am using ADSL to connect to the internet.  I recently installed a network in a business and set them up with SDSL from the same ISP (same subnet as me, too).  

Here is the problem: I can't connect to the company network from my machine -- even...

I am trying to install and configure a 3com pcmcia card to use DHCP via an SMC router connected to a cable modem.  I've set TCP/IP to DHCP but on boot up I get a message that says DHCP client did not get parameters.  Any suggestions?

I would like to protect my computer against data being copied via USB or other methods while computer is unattended. Apart from setting passwords and user settings are there any other methods to stop even the most experienced data thieves.

Is it possible to get the IP-number/subnet-mask from a DHCP/BOOTP-server within OS/2-Warp 3?
Has anyone an additional driver/program for this?

I've installed Warp 4 (with FP 4) and get a "Socket: Network is down" error when booting.  This is before the PM starts up.  I hit return and
the boot continues and all my networking seems to be fine.
All tcpip services function properly and I'm...

Hi Can I use rexec in os/2 warp 3.0 server to pass a text to an NT 4.0 Server. For example rexec n=NT command="" <text>. Can I pass this <text> to the Nt Server along with the command.