Hi Guys,
a little while ago I took over a network, and am trying to work through some problems that showed up. The one I am refering to is with the way the router deals with the IP pools f...
Hi, I have a DHCP server. I want to configure 4 Subnets in it.I have about 500 users. All my switches are NON manageble Switches. I want to give IPs to the users from the same DHCP server.I kn...
so, i'm setting up an office network for a client of mine. the router being used is the common Linksys WRT54G router. I have already set up the SSID, set up a WEP key, DHCP is enabled.
the ...
For the past couple of days, when a computer on my network is restarted, the system pulls an IP address from a DHCP server that I have never heard of. The IP address is invalid and does not g...
I am in a situation where the IT is quite fragmented and largely decentralized throughout the globe.
My CAD licencing software requires a static IP. The local network is not exactly without p...
We have been asked to attend to some network issues in a company with 15 PCs. These PCs are split between 3 buildings. All PCs should be able to access the internet through a single modem plus...
We've started getting more laptops in our company and they are eatting up the DHCP addresses since both the Wired and Wireless NIC grab addresses. I'm looking for a way that both NICs share o...
we are wondering if there is an application which can do the following.
we require to secure our DHCP so that when a users computer requests an IP the DHCP server should query AD to see whe...
We have layer 3 switch with 3 subnets and just migrated DHCP server. Where should we change DHCP relay setting so that other subnets would see DHCP server
We would like to enable a check box with the TCP/IP properties - Advanced TCP/IP Settings - DNS - "Use this connection's DNS suffix in DNS registration. Is there a way to script this in or po...
Hi,
We have a DHCP Server running in our domain and we have three subnets - 192.168.1.x, 192.168.0.x and 192.168.5.x. The first has static IP address and the second is dynamic (from the DHC...
hi,
I am using a linksys router.... It has an ip address of 192.168.1.1..... but a workstation on that lan.. .has an address i can not figure out.
It is set to a static of 192.138....
I have two networks, each one is connected to a different NIC on the server (two NICs) with two different IP ranges. I have two scopes set up and ready to assign the relevant IP range to the r...
Hello Guys,
The issue is: When I connect a machine to my office DHCP network and boot from the network for re-imaging, the machine can connect to the office PXE server and can be re-imaged ...
We have a Windows Server 2003 DHCP server. It's also a Domain Controller. It's patched up fully as of January '08, so it's only missing the most recently released patches and updates...we ha...
Is there a way to display a list of the DHCP addresses assigned by Internet Connection Sharing so you can see the IP address and device name of all the ICS clients?
We have a Windows 2000 Server running DHCP. Periodically the DHCP service will just stop. No events (as far as I can telll) are listed in the event logs indicating what the error might be. The...
I would like the DHCP addresses to last over a week and it not working at this site.
How can you fix a Vista PC so it stops giving the error message "Host Process for windows services stopped working and was closed" Plus we can't do any windows updates.
Good Morning Everyone,
I have a Server Side Application (Software Distribution) housed on a VM. One of it's features is to pull the computers found in our Domain and then push the Client Ag...
Here is the short... I have 3 machines. All wireless. 2 xp 1 vista. All were fine until about 2 weeks ago. I was running a linksys G router w/ DD-WRT open source firmware. I have been running ...
I'm trying to connect a D-Link DIR 330 router to a Westtell 6100 modem (model C99-610014-03) The DSL provider is Century Tel. The modem has a static public IP and is set to operate in bridge m...
I bought a Draytek 2910vg mostly to get a second internet line in to back up my first internet line. The first internet input is cable, the second is ADSL.
the cable input works fine...but...
