I am receiving the error message PXE-E55: ProxyDHCP service did not reply to request on port 4011 when I attempt to PXE boot to Windows Deployment Services.
WDS is deployed on a server with...
Hi All,
I am trying to configure WPAD.DAT as an automatic proxy configuration.
We have had a working PAC file for some time, so I have renamed this to wpad.dat and placed it on an internal...
We have a workstation on a domain that is set up to receive an IP address via DHCP just like all the other workstations. We have an address conflict of 192.168.0.115. I perform an ipconfig /re...
I have a comcast cable modem (Motorola SBV5220). I connect to the internet on 2 different laptops. Suddenly, one laptop (Windows XP) cannot connect anymore - I get an error that it cannot co...
I need to block a particular machine from accessing my network. I have the machine name and mac address on dhcp. Problem is that the machine just needs to connect to any network outlet and the...
Hi,
On ubuntu linux, I use dhclient to get IP address.
I add the following statements in the default configuration file (/etc/dhcp3/dhclient.conf).
-----------------------------------------...
Can anyone help with why I keep getting the mesage:
Windows - System Error
"There is an IP Address Conflict with another System on the Network"
I get the message even when all my other PC's...
Intermittently when logging on to any client machine. They receive the errors shown. They fail to enroll. No errors are seen on the domain controller.
eventid 15 autoenrollment
Failed to...
I am migrating a Cisco 2950 switch to HP Pro Curve 2810 switch, On Cisco 2950 switch there are 2 VLAN's and 2 trunck ports setted up, i am going to paste the configuration for both the switche...
I have a WAN site which uses a Cisco 2811 Router, with several Cisco 3750 switches for LAN access.
At the site I have 2 VLANs configured..
VLAN 100 = Data (172.21.10.0 /24)
VLAN 300 - ...
At the command prompt, what can I enter to give a listing of all PC's and printers on my LAN
we are trying to setup our windows 2003 server with static ip and i'm trying to open port 3389 on the network, so i'll be able to telnet the windows machine to port 3389.
something is blocki...
I found the following this link http://www.findproxyforurl.com/wpad_tutorial.html on how to configure WPAD, I want to know once it is configured on DHCP, how can I confirm that the WPAD has se...
Hello,
The question is: What layer of OSI model is DHCP on?
Can't seem to find any relevant and reputable info.
Seen lots of discrepancies on Internet.
Ranging from layer 2 [www.found...
I've a (CentOS) linux server with 2 interfaces (lan and wan) and running dhcpd.
When dhcpd start I see in the log file:
Nov 13 15:36:40 shoebox dhcpd: Listening on LPF/eth1/xx:xx:xx:xx:xx:xx...
Hi - I just set up a Win2k3 standard server with Broadcom (BCM5708C NetXtremem II GigE) nics. I assigned the server a static IP address and when you ping the address it comes back as the serve...
I want to change the IP range serviced by the DHCP server on my Windows SBS 2003 server.
It is curently leasing addresses in the range 192.168.20.60 to 192.168.20.99. I want to move the ra...
Hi there,
I am running win 2008 server with 5 NICs. One is my connection to the net the other internal network. All addresses are static. Everytime i restart the machine, the internet default...
..I need to make sure that the import process appends the scope and not replace the current scopes hosted on the destination server. I've never moved DHCP scopes like this before, and I'm look...
Hi,
I am trying to find out how to configure windows 2003's DHCP server to assign a VLAN ID. I have nortel 1140e IP phones and they have DHCP support for VLAN assignment. They will poll the...
Hello. I have a dhcp server running on a Cisco Switch with IOS 12.2. I want to reserve one IP address for a specific MAC address, so the DHCP server would lease to that MAC address always the ...
Can I set up multiple subnets in a network with one gateway? I also need to set up a second Dhcp server for fault tolerance.
Ex. 192.168.1.0 and 192.168.2.0 on one server
192.168.3.0 and...
Server 1 is the primary DNS server and also does dhcp. Server 2 is the secondary DNS server and also has active directory/exchange. I want server 2 to also act as a secondary DHCP server for...
Hi,
We would like to restore the resevations in our DHCP database after a "happy-clicker" removed them.
I have the dhcp.mdb file sitting on my desktop, recovered from backup tapes and I w...
Hi Experts,
I am trying to add a PXE server to my server 2003 domain, but I do not want to run it on my DHCP server. How do I configure my DHCP server to point clients using network boot t...
