Hi,
I have a requirement to assign multiple IP addresses to a computer with one NIC using DHCP. Does anyone know if and how this would be possible.
Thanks
Hi!
I have a network with 2 Active Directory domains. Currently IP addresses are supplied to the network from one DHCP server. What I need is for each domain to have its own DHCP server o...
Server 1 is the primary DNS server and also does dhcp. Server 2 is the secondary DNS server and also has active directory/exchange. I want server 2 to also act as a secondary DHCP server for...
Hello, My setup goes as follows:
- Windows 2003 behind linksys router (dd wrt) via NIC #1 (static ip)
- DHCP is disabled on router and installed and working on W2K3
I can successfully h...
I have been getting "There is an IP address conflict with another system on the network" error message on several of my PC's and I have checked the following:
1. Ipconfig /release and ipco...
Getting the following error on a laptop (Windows XP PRO) that is running on a wireless network connection.
"The IP address lease 192.168.1.1 for the Network Card with network address 0000E29F...
A partner of mine is about to deliver the bad news to his customer that he must set up IP address reservations on 6,000+ devices currently receiving dynamic IP addresses from Microsoft DHCP se...
Hi there,
We run an SBS server which looks after a network of about 60 XP clients. We also have secondary DC and DNS server. The SBS server is acting as the only DHCP server on the network....
The event log always shows the DHCP scope is full. At the server, under "Address Leases", the entries under the "Name" column for the workstations that have leases are almost all the server it...
Help! Last night we had to re-IP one of our Windows 2003 Domimain Controllers that is running DHCP. After changing the DNS entry for the DC and changing the IP address on the DC we were able...
Hi all,
I am using symantec Ghost 11 to ghost batches of PC's it has been running fine for the past few weeks with no problems whatsoever. I amm running the ghost cast server on a windows 2...
Dear all,
I have DHCP installed on windows 2003. We make VLAN in our network. Network engineers ask me to make different scopes (15 Scopes) in the DHCP. I made those scopes. But now how doe...
This is one more of idle curiosity than anything. There are two options in a Windows Server DHCP scope -- 004 Time Server and 042 NTP Servers
What's the difference?
Our "inherited" network only has one windows 2000 DC, running DNS and DHCP so we are going to add a new 2003 DC in for redundancy. We have a plan that includes the forest prep domain prep etc...
HI Experts,
I am setting up a voip solution into my netwrok. Currently I have 2 switch cisco 2950 and one router cisco . one server that has DHCP. I just bought a new switch from DELL 3448 ...
Hi Experts,
When I ping from dos prompt, ip address times out.
Yet when I browse from firefox or ie, it is ok. Why is that?
Windows IP Configuration
Host Name . . . . . . . ...
Can I set up multiple subnets in a network with one gateway? I also need to set up a second Dhcp server for fault tolerance.
Ex. 192.168.1.0 and 192.168.2.0 on one server
192.168.3.0 and...
Can I have 2 totally seperate forests on the same subnet, 192.168.1.0 both running DHCP and DNS ? If I give the first one a scope of 192.168.1.0 to 192.168.1.50 and the second one 192.168.1....
Due to expansion our DHCP server is out of IP addresses to assign. Our current address pool is 10.0.0.20 - 10.0.0.240, and when I display statistics 221 of the 221 available addresses are in u...
Hi, experts:
I download the DHCP client source code from "http://www.isc.org/index.pl?/sw/dhcp/".
I want to use DHCP Option 125 to get vendor-specific information. ( Device < = = > Gateway ...
hi, I have adopted an SBS server 2003 I have two nics installed and a router managing DHCP I want to transfer the DHCP to the Server this weekend. However when i try to create the server in DH...
I have two CentOS 5.1 linux machines on the same network.
I have a dhcp server set up. I'm restarting networking on the client machine. It finds the dhcp server and restarts networking, Bu...
I gave a local computer (windows XP professional) a static IP address via TCP/IP Properties tab in network connection. I did this a few weeks ago and all of a sudden the IP address was no long...
To All,
My question to you is, can we run two DHCP scopes off one server for two different networks? How would we do that?
Attempting April Fools joke. Have setup a 2nd DNS server that contains entries for msn.com, Gmail, ESPN.com that point to an internal IIS server with a fake "you are being monitored" message. ...
