The MS technet article shown below says I can configure a WPAD entry in my DHCP scope, but doesnt give specific instructions on how to do so. The highest number I see on the options I can add ...
Dear all,
I have DHCP installed on windows 2003. We make VLAN in our network. Network engineers ask me to make different scopes (15 Scopes) in the DHCP. I made those scopes. But now how doe...
Hi there,
We run an SBS server which looks after a network of about 60 XP clients. We also have secondary DC and DNS server. The SBS server is acting as the only DHCP server on the network....
How can I transfer DHCP Lease ownership from one server to another? If I deactivate the scope on server1 and activate the scope on server2, several of my workstations loose IP addresses, (The ...
Attempting April Fools joke. Have setup a 2nd DNS server that contains entries for msn.com, Gmail, ESPN.com that point to an internal IIS server with a fake "you are being monitored" message. ...
Ok, what i need to do, I have an MPLS network going in. i need to be able to tag the VOIP traffic. Currently my phones have DHCP exceptions by MAC . but this won't work..they want to tag net...
Hi Experts,
This is about integrating a PABX switch (telephone switch) with our IP address environment. We have one DHCP server allocating IP addresses in the range 172.16.150.20 to 172.16...
I have two physically separate networks that are connected via a Dell PowerConnect 5324 switch...A voice network (192.168.14.0/24) and a data network (192.168.15.0/24). Right now, DHCP reques...
At the command prompt, what can I enter to give a listing of all PC's and printers on my LAN
Can I have 2 totally seperate forests on the same subnet, 192.168.1.0 both running DHCP and DNS ? If I give the first one a scope of 192.168.1.0 to 192.168.1.50 and the second one 192.168.1....
We have a Cisco 3750G-12 running 12.2. When I create the DHCP pool and do not add a lease time, what will be the default lease given by the device
HI all,
I have a windows 2003 cluster and DHCP is in cluster mode.
I have 2 remote sites
head quater: 192.168.10.x/24
remote site 1: 192.168.11.x/24
remote site 2 192.168.12.x/24
b...
We are starting to segment off our network instead of a plain old flat network. ON top of these changes our development department is wanting to have a QA and Dev network so they can have thei...
Hi experts.
We have Altiris 6.8 SP2 Deployment Solution
I've setup and configured the Altiris PXE server, it's on the same subnet as the client servers 10.0.0.0/255.255.248.0
The DHC...
I am wanting to assign a static IP address to my Zebra LP 2844 Label Printer. The default IP is 192.168.254.254. I can not supply this address in explorer and get to the configuration page. ...
DHCP server shows active leases with a paintbrush or pencil over the computer icon. Haven't seen this before, what's it mean?
Is this something that will fix itself? Is it a problem that I ...
Hi! I'm looking to setup an ip helper address on my 3com 4200 switch and I cannot find that option in the switch management. The goal is to have a DHCP server server issue IP addresses from 2 ...
I would like to know to which device should I use Reservation and which shouls I use Exclusion in DHCP.
thanks
I have one subnet in this office. The scope for DHCP leases currently has 192.168.203.130 - 240.
70-129 are used as static. I'm running out of addresses and thought I would add 40-69 to...
We are currently providing network connectivity to an apartment complex with the following setup.
Cisco 2821 Router -> Cisco Catalyst 3750 24-port Fiber Switch -> Cisco Catalyst 2590 24-p...
I have been getting "There is an IP address conflict with another system on the network" error message on several of my PC's and I have checked the following:
1. Ipconfig /release and ipco...
Hi Experts,
I have a interesting issue with DHCP scopes and superscope. My old setup had a superscope and 2 scopes inside it, computers/printers would share ip addresses between the two sc...
Hey there, we have a server with a DHCP scope and a bunch on manually entered reservations.
We just found out the person who created the scope, did not switch the Subnet mask to a class "C...
In the MMC console for DHCP, what actually determines the status of the reservation (active or inactive)?
If a machine gets a reservation, then is shut off for longer than the lease duratio...
I have installed a win2003 Server as a DHCP server.
When i use a win XP client, to obtain an IP from that server, it takes about 30 seconds.
When i use the Deactivate and Activate from cli...
