Ok, what i need to do, I have an MPLS network going in. i need to be able to tag the VOIP traffic. Currently my phones have DHCP exceptions by MAC . but this won't work..they want to tag net...
My DC is a Windows 2003 SBS.
I'm getting an error in the system log that states the following:
"The DHCP service has detected that it is running on a DC and has no credentials configured...
We are currently providing network connectivity to an apartment complex with the following setup.
Cisco 2821 Router -> Cisco Catalyst 3750 24-port Fiber Switch -> Cisco Catalyst 2590 24-p...
At the command prompt, what can I enter to give a listing of all PC's and printers on my LAN
We currently have one DHCP server in our environment and are deploying a 2nd with split scopes. We have a few questions re: implementing these, however. Were planning on excluding .1 - .50 ...
I am migrating from a Linux DHCP server to a Windows 2003 Server DHCP.
Our wireless network scope on the linux server requires that the MAC address be "authorized" (for a lack of better ter...
I created dhcp pool but noticed i was not receiving an ip address for a device connected on vlan1 of the integrated 8 port switch. After looking all thru the IOS software i broke down and use...
I wish to deny an IP address to a specific MAC address on my network. I'm on FreeBSD 6.2 using ISC DHCP 3.03. Is this possible?
Windows 2003 Server... I have two subnets on a vLan. Subnet one is 192.168.0.1 and Subnet two is 192.168.11.1. One DHCP server currently hands out IP's. This is a problem when one computer ...
We woulld like to have our IP phones on a unique subset using MAC address exclusions. Rather than type the entire MAC address we would like to use wildcards to exclude all of the manufacturers...
The network is running slow transfering files from Small Business Server 2003. When I transfer files to the server from any of the desktops it transfers fast. But when i try to copy files from...
Hi, I am having an odd DHCP issue and have probably missed something obvious or fundamental here. The scenario is an SBS 2003 Server being scaled out to a full Server 2003 Domain environment. ...
Is there any management software for the DHCP servers,
Case : 2 DHCP servers working seperately in a single domain single forest wit AD 2003.
OS of the DHCPs is win2k3 standard.
IP addresse...
Is there anyway to get the IP address of the switch a workstation is connected to. The layer 2/3 switches we use are 3com 3300/xm switches, which all have an IP address. What I am doing now...
Hi all,
I have 2 DHCP Servers running on the Network based on Windows 2000 Server SP4, 1 DHCP is running on Domain Controller with address range 172.16.128.169 to 172.16.128.250. The other ...
I'm new to DHCP with Windows. I just transferred DHCP responsibility from my Linksys router to my Windows Server 2003 DHCP server. Now I'm about to set up a Remote Desktop box for some of th...
I am trying to set up my Cisco 1720 router to be a DHCP server with manual bindings. I'd like to specify each PC's ip address and tell the router what IP to assign the host. This way if someon...
Is there a way to print out a configuration page that shows the ip that the copier has assigned to it. Several users cannot print to the copier and I believe it is because they have the wrong ...
We have 2 servers each with an internet connection. Presently one of the servers is a DHCP server and issues out addresses to all clients with itself as the gateway address (it performs the ro...
I have a new domain controller set up to run DHCP and while I can configure everything to the network using static IP for some reason it doesn't grab the correct IP address if at all. There i...
I have started having a problem with DHCP clients reverting to an old set of dns servers. It seems right now to be pretty sporadic. I have seen it happen across sevral different model NIC card...
Hi all.
I have 2 DHCP servers running at a head office. Both are serving the same Regional Superscope which contains a scope for both the head office [172.16.x.x] and a regional branch offi...
I need to move DHCP & DNS from our old DC which is Windows 2000 SBS to our new DC which is Windows 2003 SBS. I have found an Article from MS KB 325473 for the moving of the DHCP. Im pretty con...
I have recenlty set up a new Server with 15 workstations. The Server is running Windows 2003 Server standard edition (Latest service pack) and all of the workstations are running Windows XP P...
Hi,
I am using CISCO 2950 switchs and an 500G backbone on a LAN. I would like to prevent any other server
or workstation that connect to the LAN to be to act as a DHCP Server. Presently, m...
