My Server 2000 dhcp server has been acting very strange lately so i have decided to replace it before it finally fails. I havge a windows 2003 server built and ready to take functionality off ...
We have 2 vlans and need to have the DHCP server on one vlan ( 500 ) and the dhcp clients on a different vlan ( 200 ). Is there a way to forward the packets across the vlans ? We want the ...
If the DHCP server happens to not respond... What is the expected behavior? Do all clients go down or just the ones trying to get a new lease?
Hi Guys,
a little while ago I took over a network, and am trying to work through some problems that showed up. The one I am refering to is with the way the router deals with the IP pools f...
On my network I used to use 1.1.200.5 for my default gateway via DHCP, that was changed to 1.1.200.3, these gateways are used to route to trusted domain on another network. All computers on m...
here is my setup. my wireless router is upstairs with my modem, it can't be moved. my desktop pc is downstairs. connected through a wireless card (linksys card and router 54g) excellent signal...
Hi, I have a problem with the dhcp setclassid command.
I actually created a bat file to run the setclassid. It works well for administrators but when i put as the logon script for my users. t...
Background info:
I'm using SBS2003 R2 standard edition and its setup as the DHCP server.
The IP range is 192.168.110.1 to 192.168.110.254 with an exlcusion range of 192.168.110.1 to 192....
here is my environment. we have a cluster, each server, miami1 and miami 2 NOW share the responsibilities. from 192.168.0.1 - .35 they are static for servers. then from 192.168.0.181 to .254 a...
I have two windows 2003 domains, running over the same network. They have diffrent IP schemas, one is 10.20.148.x - and the second is 10.20.146.x - If I need computers on both subnets to be ab...
Hi Guys
I have a Question about Symantec Network Threat Protection. I have install it on a DC 2003 64 bit and I realize that when is on the DHCP server does not assign any ip to clients. I di...
we are wondering if there is an application which can do the following.
we require to secure our DHCP so that when a users computer requests an IP the DHCP server should query AD to see whe...
We've started getting more laptops in our company and they are eatting up the DHCP addresses since both the Wired and Wireless NIC grab addresses. I'm looking for a way that both NICs share o...
We have been asked to attend to some network issues in a company with 15 PCs. These PCs are split between 3 buildings. All PCs should be able to access the internet through a single modem plus...
We have two sites with seperate subnets. 1 is the working site, the other the DR site.
Even though PCs now have a DHCP reservation in place, after the DC (Server 2k3 R2) is rebooted, certa...
Hi,
We have a DHCP Server running in our domain and we have three subnets - 192.168.1.x, 192.168.0.x and 192.168.5.x. The first has static IP address and the second is dynamic (from the DHC...
We have layer 3 switch with 3 subnets and just migrated DHCP server. Where should we change DHCP relay setting so that other subnets would see DHCP server
Hello, So i have a Hp nc6320 laptop. That has the built in wireless card. It is having some serious connectivity errors. I have 2 linksys AP's (same model) and it can connect to 1 but not the ...
Today I disabled the DHCP server on the firewall that was setup by another consulting company. I then enabled the DCHP server on the Small Business Server 2003 server. None of the computers ge...
We have a Windows 2000 Server running DHCP. Periodically the DHCP service will just stop. No events (as far as I can telll) are listed in the event logs indicating what the error might be. The...
As I understand it, if two DHCP servers, Server1 and Server2, are actively updating DNS records and and Sever1 goes down, DNS records can end up "stale" because Server2 does not have adequate ...
After installing Symantec's Endpoint Solution DHCP stopped working. I only installed the Anti Virus and not the Threat Protection and Firewall as they have known issues.
Users can connect ...
What I am trying to do is to create another GC server in case the original goes down. I have installed win2003, added DNS, DHCP, Active directory and started replication. I even transferred th...
Running on W2K SBS, my DHCP scope has 126 available addresses. For a week now I have been having 96% of the addresses in use! I cannot seem to find where they are being used. No ping response ...
I Recently reloaded win xp pro and also win 2000 on two different computers and then I tried to connect to the internet. Here were the i.p. settings.
IP Address: 169.254.95.226
Sub...
