I work in a large plant. Getting IP management under control is a challenge. I do not want people to be able to just plug in a laptop and see the network. Having an ip under reservation is ...
Sir
I need to change subnet mask in my dhcp server settings.i have used 255.255.255.0 as subnetmask.but i need to change that to 255.255.254.0 .where can i change subnet mask in dhcp settings...
I am looking for a group policy, or some other setting which will allow my server to only assign a dhcp lease if you are part of the windows domain... I want to avoid users or anyone else for ...
I fresh installed second 2003 DHCP server in the same physical subet.
Now, two 2003 DHCP servers are releasing different scope ip but in the same physical subet.
The problem is that both ser...
How can I prevent someone from plugging into my network and getting an assigned IP address from the dhcp server? When I look at the address leases I see all kinds of computers on the network....
We have a small School environment running Windows Server 2003 and an AD Domain. The Server handles DHCP and DNS for all PCs. The problem we are having is that users are logging on with a ge...
We have a Windows Server 2003 DHCP server. It's also a Domain Controller. It's patched up fully as of January '08, so it's only missing the most recently released patches and updates...we ha...
Is there a way to display a list of the DHCP addresses assigned by Internet Connection Sharing so you can see the IP address and device name of all the ICS clients?
What are the potential problems that could be encountered when converting from a static ip network to a DHCP one? Nothing detailed required, just a bulletted list
We have a network with W2k3 severs (mixed domain) with a mix of W2k and XP clients. We have DHCP running. What we have noticed recently is someone can come into one of our locations and log on...
Computer is connected to ADSL router. It used to work perfectly till a few days ago. Now the problem is that there is no DNS nor gateway address given (checked with "ipconfig /all") although t...
Windows XP Pro
We have a PC where the control panel applets where removed with a registry editing tool. The PC also has a static IP. We can access the command line prompt (DOS) as the adm...
I bought a Draytek 2910vg mostly to get a second internet line in to back up my first internet line. The first internet input is cable, the second is ADSL.
the cable input works fine...but...
I'm trying to connect a D-Link DIR 330 router to a Westtell 6100 modem (model C99-610014-03) The DSL provider is Century Tel. The modem has a static public IP and is set to operate in bridge m...
Here is the short... I have 3 machines. All wireless. 2 xp 1 vista. All were fine until about 2 weeks ago. I was running a linksys G router w/ DD-WRT open source firmware. I have been running ...
Good Morning Everyone,
I have a Server Side Application (Software Distribution) housed on a VM. One of it's features is to pull the computers found in our Domain and then push the Client Ag...
I would like the DHCP addresses to last over a week and it not working at this site.
Linux box is running a DHCP server. When a winXP client tries to get an IP address it just keeps trying with no timeouts and no errors. If I try to repair the connection on the winXP system ...
Hello experts
I have a Site-Site VPN set up.
I can ping IP addresses of the two subnets on either side of the VPN.
All services are working well
One side, I have a DNS server.
The oth...
I am using SBS 2003 Standard Edition R2. I have a range of IP addresses for the server to assigned via DHCP for the client machines. I have static IPs for the networked priters and fax machine...
I know all aobut IP address and subnet masks t oan extent but i was curious if this hypothesis is correct before i try it. I run a small network at a private school in houston currently we ar...
When my computer negotiates DHCP, is there a way to get it to send a different name to the DHCP server other than the computer name?
We have 2 vlans and need to have the DHCP server on one vlan ( 500 ) and the dhcp clients on a different vlan ( 200 ). Is there a way to forward the packets across the vlans ? We want the ...
Today I disabled the DHCP server on the firewall that was setup by another consulting company. I then enabled the DCHP server on the Small Business Server 2003 server. None of the computers ge...
We have a Windows 2000 Server running DHCP. Periodically the DHCP service will just stop. No events (as far as I can telll) are listed in the event logs indicating what the error might be. The...