How is a DHCP server registered in AD? One of my colleauges have enabled the DHCP service on a MAC server and that makes some problem on my network. He uninstalled the service on the MAC serve...
What is the best method to monitor a client activity?
Particularly interested in remotely viewing the internet activity of a user on the network.
I have a D-Link 4 port router that is hooked up to a cable modem via the wan port. I have 2 computers plugged in, a windows vista machine on port 1 of the router(works perfectly with dhcp and...
We woulld like to have our IP phones on a unique subset using MAC address exclusions. Rather than type the entire MAC address we would like to use wildcards to exclude all of the manufacturers...
I'm trying to connect a D-Link DIR 330 router to a Westtell 6100 modem (model C99-610014-03) The DSL provider is Century Tel. The modem has a static public IP and is set to operate in bridge m...
We have two sites with seperate subnets. 1 is the working site, the other the DR site.
Even though PCs now have a DHCP reservation in place, after the DC (Server 2k3 R2) is rebooted, certa...
How can you fix a Vista PC so it stops giving the error message "Host Process for windows services stopped working and was closed" Plus we can't do any windows updates.
Hi,
We have a DHCP Server running in our domain and we have three subnets - 192.168.1.x, 192.168.0.x and 192.168.5.x. The first has static IP address and the second is dynamic (from the DHC...
This is a wierd one. We have a Windows 2003 Server that we move the DHCP scope off of back in March 2008. Everything has been running fine until last week. All of a sudden the server stoppe...
I can set the user's IP to a static address and it works well for the remote desktop session. What happens later is that when the user attemps to log into the regular Novell Network at her usu...
Just started working at a company that uses a SonicWall TZ170 as DHCP server. All IP addresses are assigned dynamicly; there are no static IP addresses set up on it. Lately there have been I...
hi,
I am using a linksys router.... It has an ip address of 192.168.1.1..... but a workstation on that lan.. .has an address i can not figure out.
It is set to a static of 192.138....
I have 2 Nics cards
Eth1 is connected to the business network 1 10.10.0.144
Eth0 has a cross over cable to a XP system
What I am trying to is to serve DHCP on eth0 and con...
I logged into my Windows 2003 Server to check a DHCP reservation and everythings blank. It looks like DHCP was never set-up on this Server, which is the domain controller, DNS Server, FTP Serv...
