Mike Roe
asked on
Cisco R180w
I have two remote small offices with Cisco R180w using VPN tunnel to a netgear FVS318G. I cannot get DNS to work from these remote offices to our corporate. The VPN connection has been working fine and i am able to do everything by ip address. Can someone explain how to pass DNS traffic over the VPN tunnel to our DNS server? I do not have an opportunity to put dns servers in the remote offices since they only have 2 to 3 computers and VPN has worked fine.
I have access rules for dns from LAN to WAN setup on the Cisco and Lan to Wan from netgear box.
cisco lan is 192.168.200.1
Action:Lan to Wan
Source IP: ANY
Destination IP:192.168.1.20 (dns server IP)
gateway:public ip for tunnel
Netgear lan 192.168.1.1
action:broadband
destination IP:192.168.200.1
gateway:public ip for tunnel
Thanks
I have access rules for dns from LAN to WAN setup on the Cisco and Lan to Wan from netgear box.
cisco lan is 192.168.200.1
Action:Lan to Wan
Source IP: ANY
Destination IP:192.168.1.20 (dns server IP)
gateway:public ip for tunnel
Netgear lan 192.168.1.1
action:broadband
destination IP:192.168.200.1
gateway:public ip for tunnel
Thanks
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
I don't think so. I think you need to set for each computer.
ASKER
Worked great. Remotely added to computers and works fine.
@M Roe - Thank you and I was happy to help.
ASKER