So I've been having a huge problem trying to get the built in windows VPN client to connect to the VPN firewall. From what I understand you have to use L2TP in order to connect vs pptp. So I...
This is the pertinent part of my config. I have aythetication set up on a radius server, but should I authenticate a simpler way before? I keep getting error 413...
interface GigabitEtherne...
Hi,
I am configuring a IPSEC VPN tunnel between 2 x 1841's and this is the first time I have ever attempted this.
This is a lan-lan vpn. The local lan is the 10.5.11.0/24 range and the r...
We have a Sonicwall TZ 170 setup as vpn with DHCP (Sonicwall is only DHCP server on the lan) over VPN/Central Gateway/Use Internal DHCP server for global vpn client.. My issue is two-fold:
...
Issue connecting Watchguard 1000 to NetscreenFirewall. IPSEC Tunnel.
The tunnel can be brought up from the watchguard end only, but when trying to bring up from Netscreen, no responce..
...
How can I configure ipsec connection?
I have Cisco PIX 515E and it is my users can log from outside through microsoft VPN to my PIX but I need to creat other VPN on it from other company with IPSEC
please advice this can be? if...
hello everyone,
i currently work ina business that provide broadband connections for clients whom rent office space. a client has asked if we can provide a static ip with ipsec? we do provi...
Good day, I need to access an IBM srv's RSA card, from behind a FW via Web Browser. I need to know if there are any other ports that i need to open, beside the HTTP, and also any other things ...
I have a NS5XP and Cisco ASA 5505. I'm trying to set them up witha site to site VPN. I'm proficient with the ASA and I know the config is right. The NS I am not so good at.
The NS is at th...
I am running multiple Clarkconnect boxes what are all connected by IP Sec over internet, this works very well to link the Lan, but what I want to do is have them all connect back to head offic...
One user using the Cisco VPN client is getting different routes than everyone else. This user is therefore unable to ping the network, however the rest of the users are fine. e.g.
The weir...
I am based in NJ. I have a small operation in CA that rents a space in a larger facility and therefore is a part of their network. I need this CA facility to be able to connect via a remote ac...
Hoping someone can help diagnose what the issue here is. I have had another person look at this with no luck so far. The router has IOS (C870-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SO...
I am setting up a new SBS 2003 R2 (Standard) server but am stumped about the one nic or two question.
I know that general best practice is to install two nic's and host the internal networ...
I have a client who has a 3cr870-95 router in place. It connects up very well to the remote VPN gateway (this is a site to site VPN, not a client>gateway). However, at seemingly random times...
Can i use the Cisco 2811 to route VPN traffic from different branch offices. So that each branch offices can be communicate to the headoffice as well as other branch offices.Also provide the p...
What is the best way to allow Remote VPN Access to users? The purpose is to allow technology to be able to troubleshoot when travelling.
We are looking for solutions on Cisco VPN Concentrato...
I am trying to create a point to point tunnel between 2 sites, and I was wondering if there is a Pix sim I could use to practise before I deploy this on to our Prod enviroment. and any suggest...
Hello Everybody,
For a week I try to setup a Site-to-Site Vpn between 2 851 Cisco Router thru the SDM interface. Up to now, I'm able to get the VPN UP, but I can not ping on the...
Hi. I've searched EE for this one and there are some similar ones but can't find step-by-steps to get this working. Situation is this:
SBS03 on 192.168.116.x - all working sweetly.
IPSEC...
Hello
I have some problems with my test lan 2 lan conf.
I hope some one can help me. :-)
I have made a
packet-tracer input inside udp 192.168.1.1 isakmp 192.168.10.1 isakmp
Th...
I have a SnapGear SG550 at my main location doing IPSec tunnels for two remote loactions (for IP phones and network resources). The remote locations both have Linksys BEFSX41's and are configu...
I am looking to implement ipsec for all internal traffic going to and from my servers, 2003 AD with two dc's. Though I know I can use kerberos for security, are there any other ramifications I...
I am currently trying to configure a pair of Cisco ASA 5505s. The requirement is a site to site VPN plus user VPN's into one of the sites. The site to site is working fine. However - I can't s...
