After using the ASDM wizard to setup the tunnel between two ASA 5510, I still cannot communicate between the local inside network and the remote inside network. Can anyone please take a look...
I'm having trouble creating a VPN tunnel between a Cisco ASA 5510 v 7.0(6) and a Firebox X7506 v8.3. I've successfully connected another office using a Cisco PIX 515 to this FireBox using the...
So I've been having a huge problem trying to get the built in windows VPN client to connect to the VPN firewall. From what I understand you have to use L2TP in order to connect vs pptp. So I...
I am having an issue getting some VPN clients to connect to the VPN concentrator and actually establish the connection.
I am using the following:
Cisco 3000 series VPN concentrator
Cisco ...
I am trying to set up a Site-to-Site VPN network. Right now I am trying to make this work in the lab. I have the Internet port on the Linksys connected directly to port 0 on the cisco which wa...
I have an XP pro laptop. I recently ran XP repair to fix an issue where the laptop would blue screen after 5 minutes of being turned on consistently. After the repair I installed all OS patc...
I have a Cisco ASA 5505. I have the initial setup working fine. I have not setup a VPN before and, using the ASDM VPN Wizard configured it the way that seemed correct to me. I am using the Cis...
Hi folks,
I'm installing a Cisco ASA 5510 and I want my users to VPN in using the Cisco Client and IPSec, authenticating to a Windows 2000 RADIUS Server.
This is my first ASA install, an...
Hi All,
I have an issue with configuring an ASA 5510 (I will post the config if neccessary). I would like to be able to have my VPN clients who have an address of 10.1.10.X to route across...
I have a PIX 515E Unrestricted License located at my collocation facility. I have remote access IPSec set up on this firewall and we use the Cisco Systems VPN Client ver. 4.8.01.0300. I hav...
Hi,
I am configuring a IPSEC VPN tunnel between 2 x 1841's and this is the first time I have ever attempted this.
This is a lan-lan vpn. The local lan is the 10.5.11.0/24 range and the r...
We use a Cisco VPN 3015 concentrator and the Cisco VPN Client for remote access to our network. I am using one of our first Vista machines. On our XP machines which run the 4.8 version of th...
I have a Cisco ASA 5510 that I am trying to configure for remote access VPN. I need it to work with regular OS -based VPN clients in addition to Cisco's client. I think to make this work I w...
This is the pertinent part of my config. I have aythetication set up on a radius server, but should I authenticate a simpler way before? I keep getting error 413...
interface GigabitEtherne...
Replaced PIX with ASA 5510 v8.02. Tunnel comes up when traffic is sent, but no traffic gets through.
Not sure what I"m issing. Traffic for other tunnels (not listed in config get through)....
We have several sites that all connect to the main site through an IPSec VPN tunnel over 1.5 mbps DSL. The latest site we set up is having problems not being able to login and stay logged in t...
The company I work for utilizes a Cisco VPN (Cisco VPN Client 4.8.01.0300) to back-up and share data. There is one person having difficulty connecting to the VPN. She is running a PC with Win...
Hi
We have a Cisco 1841 configured for VPN using the Microsoft L2TP/IPSec connection. This is working at the moment but we want to move over to using the Cisco VPN Client.
I have the ...
Cisco ASA vpn can not be established correctly. Every time I try adding a crypto dynamic-map I get a warning i.e. " WARNING: Existing map is being linked to dynamic-map: vpn_map.
Al...
Hi Experts,
We have a Cisco VPN Concentrator 3000 with numerous site to site lans.
We are moving to a new Cisco ASA 5520 and i am trying to configure the site to sites on the ASA.
We have N...
I am unable to establish a gateway to gateway VPN using Linksys RVS4000 boxes at each end. I am using IPsec. At one end I have a cable modem that is passing a public static IP directly to th...
Hi,
I have a VPN setup problem with my Cisco IOS.
I set up the VPN and when I trigger the traffic to the other peer's VPN domain the VPN comes up smoothly and the IKE and IPSec security as...
We have a Sonicwall TZ 170 setup as vpn with DHCP (Sonicwall is only DHCP server on the lan) over VPN/Central Gateway/Use Internal DHCP server for global vpn client.. My issue is two-fold:
...
Having problems trying to setup a PIX to accept IPSEC tunnels from both remote clients using Cisco VPN Client as well as a site-to-site tunnel connecting to a Linksys WRVS4400N. Everything is ...
I have setup a VPN from our corp. site which uses ASA 5510, to a remote site with the watchdog. If the remote site initiates the traffic via ICMP the tunnel builds and it seems to work. Only t...
