I have Cisco PIX 515E and it is my users can log from outside through microsoft VPN to my PIX but I need to creat other VPN on it from other company with IPSEC
please advice this can be? if...
Hi
We have a Cisco 1841 configured for VPN using the Microsoft L2TP/IPSec connection. This is working at the moment but we want to move over to using the Cisco VPN Client.
I have the ...
One user using the Cisco VPN client is getting different routes than everyone else. This user is therefore unable to ping the network, however the rest of the users are fine. e.g.
The weir...
Hello
I have some problems with my test lan 2 lan conf.
I hope some one can help me. :-)
I have made a
packet-tracer input inside udp 192.168.1.1 isakmp 192.168.10.1 isakmp
Th...
Hi , i want to connect my two branches through private network everything fine with me my all configuration are the same that I did it before and i have less more experience of Cisco PIX espec...
I can't get a working site to site VPN between 2 ASA 5505 .
two public asa's connected behind a transparant dsl router. PPTP from a windows client over these routers work fine.
Does anybo...
Hi,
I have a VPN setup problem with my Cisco IOS.
I set up the VPN and when I trigger the traffic to the other peer's VPN domain the VPN comes up smoothly and the IKE and IPSec security as...
Hi All,
I have two offices with a PIX 515 at one end and a PIX 506E at the other. On the site with the 506E we also have call manager express running with 6+ IP phones connected. On the sit...
I recently replaced a SonicWALL PRO 3060 with a Cisco ASA 5510, and I'm having problems with my VPN tunnels and RIP routing. My remote sites have SonicWALL TZ170s, and I could have them send ...
Good day, I need to access an IBM srv's RSA card, from behind a FW via Web Browser. I need to know if there are any other ports that i need to open, beside the HTTP, and also any other things ...
Customer is currently have Verizon Fios Interet + Tv
Verizon is using a Actiontec Router
Actiontec router have a Coax Cable connect to it for the Ondemand to work.
Actiontec have a ip of ...
Issue connecting Watchguard 1000 to NetscreenFirewall. IPSEC Tunnel.
The tunnel can be brought up from the watchguard end only, but when trying to bring up from Netscreen, no responce..
...
We currently have an ASA carrying traffic for 160 branch offices. Our ISP is providing all IPSec tunneling as part of a managed service. I am wanting to move 84 of our "Off Net" branches provi...
I have a Dlink DI-624 Router. The server is running Windows 2003 R2. The Clients are XP SP2. No software firewalls involved.
I have already port forwarded the proper ports and enables pptp ...
I am trying to set up a site-to-site VPN from a WatchGuard Firebox X750e (Fireware v8.3) and a WatchGuard SOHO 6 (v6.4.1). I believe the tunnel is setup correctly but I cannot get traffic to p...
We have a working configuration of IPSEC VPN authenticating Cisco VPN clients against a Microsoft IAS server on a PIX515e. We need help migrating that configuration to a Cisco 2821 ISR. We s...
I have a PIX 535 and I created a local user account. Then I went thru the VPN Wizard to setup the remote access VPN. I setup a preshared key and tunnel group name. When I try to connect I g...
I am trying to create a site to site VPN tunnel from our Linksys RV082 to an ISA 2006 server (Windows 2003 R2) with is connected to the internet via a DSL router. I am however having difficult...
I need instruction on creating and authenticating a vpn certificate for individual user. So that certificate can be requested, issued and athenticated from outside the network. I need to know ...
I currently run a small network with IPCOP and COP Filter, and use the IPCop VPN to remote offices also running IPCOP Boxes.
I want to set my head office ip cop box up with 2 red NIC's - (2...
When creating a IPSEC VPN can each side have the same internal network?
Location1 is configured for 192.168.100.x/255.255.255.192 which has the only server.
Both sides will have a Freedo...
Cisco PIX 515
Pix Ver: 7.2(4)
ASDM Ver: 5.2(4)
I recently upgraded our PIX from 6.3 to 7.2 in order to do L2TP/IPSEC VPN with our Windows Clients. Currently we have 4 site to site stati...
I have a Suse 10.2 machine running on my company's network. I access the company's network using Cisco VPN client from my Windows based computer at home. I use Putty (ssh client) and Xming (...
hello everyone,
i currently work ina business that provide broadband connections for clients whom rent office space. a client has asked if we can provide a static ip with ipsec? we do provi...
I have setup a VPN from our corp. site which uses ASA 5510, to a remote site with the watchdog. If the remote site initiates the traffic via ICMP the tunnel builds and it seems to work. Only t...
