I am in the process of configuring a Cisco 1720 Router to be a VPN server for the Cisco VPN Client software. We intend on using it for our mobile users alone.
I have been able to get the...
I'm having issues establishing a sonicwall to sonicwall VPN. One end had a static IP thru comcast BUT it's double nat'd.
Site 1
Comcast/SMC Device Static WAN IP xxx.xxx.xxx.xxx
Comcast/S...
hello
I would need someone to test something for me.
I have been working with Micorsoft support ( for hours) on an vpn port issue and we are at odds.
our server was running PPTP vpn con...
First - I am an experienced IT professional but primarily a "software guy". I have plenty of exposure to network configuration and equipment but I am not a CISCO certified engineer, nor do I ...
Hi All,
Could someone please guide me on setting up the timeout for an IPSEC Tunnel.
we have some servers that are present in a hosted environment and an IPSEC Tunnel has been configured b...
I have a Cisco Pix 515E. It has 32mb of RAM and a Restricted license. I am currently running v6.3.5.
I am in the need to setup a DMZ for a spam filter box as well as setup either SSL VPN ...
I have a NS5XP and Cisco ASA 5505. I'm trying to set them up witha site to site VPN. I'm proficient with the ASA and I know the config is right. The NS I am not so good at.
The NS is at th...
I have setup a site to site VPN that connects without a problem. My main concern is that on one end is a SBS2003 server that handles all DHCP assignments and for some reason I am unable to ge...
Hello experts!
Our company uses Ingersoll Rand HandPunch 4000A as our Punch Clocks. They have a built-in Ethernet Card to communicate with "eTime" the Punch tracking software.
One of our...
I have a Cisco ASA 5505. I want to forward traffic to the webmail OWA.
How can i forward the users to the webserer to access their OWA Account. i don't want to use port 80 or 443.
Can somebo...
I am setting up a new SBS 2003 R2 (Standard) server but am stumped about the one nic or two question.
I know that general best practice is to install two nic's and host the internal networ...
I connect to my office from my home via a hardware VPN. At the office, we have a Watchguard router and at my home, a Netgear DG834. However, the connection is very flakey - it drops and reco...
Hello everyone! I have a Cisco PIX 501 at the office with the Cisco VPN setup. Everything works great when I use the Cisco VPN Client v4.x and v5.x. However, when I bring my laptop to my ho...
I am running multiple Clarkconnect boxes what are all connected by IP Sec over internet, this works very well to link the Lan, but what I want to do is have them all connect back to head offic...
I am running a Sonic Wall Pro2040 and I am trying to connect to my client's network through a VPN I configured. I have verified their gateway's IP is correct, but I can't ping that address. Th...
I am trying to correctly configure a Cisco 2600 router v 12.3(8) to connect to an ASA 5510 via ipsec (site to site). For some reason, the crypto map configuration is different than from what I...
I have a SnapGear SG550 at my main location doing IPSec tunnels for two remote loactions (for IP phones and network resources). The remote locations both have Linksys BEFSX41's and are configu...
I've set up VPN on a Windows 2003 SBS, but cannot connect from outside. I've forwarded ports 1723 for PPTP and IPSec 500 & 50-51 on the Etherfast® Cable/DSL Router BEFSR41 V3 Linksys Router (...
I am having difficulties connecting via VPN with IPSEC to our ISA 2006 Server. Connecting using PPTP will work just fine. I'll describe the environment, then the steps I've taken.
The ISA 2...
I have a client who has a 3cr870-95 router in place. It connects up very well to the remote VPN gateway (this is a site to site VPN, not a client>gateway). However, at seemingly random times...
I have a standard Sonicwall 2040 device. I get about five different SonicWall Alert messages on a very consistent basis, and I was wondering if I have something setup improperly, or if it's j...
Hello,
I was running Cisco VPN Client ver 4.6 on my PC at home and a laptop at work. I upgraded the work laptop to version 5 and tested it using a dial-out connection and everything worked g...
I am using cisco VPN to open a tunnel. It is working over IPSEC.
What I want to do is once i use the CISCO vpn software it will use a different default gateway to access this network. Pl...
I have a VPN tunnel created between a Cisco 3030 VPN concentrator and a Watchguard Firebox 700. The tunnel is up but I can't ping anything back and forth, when I look at the VPN concentrator, ...
I recently had trouble getting an IPSEC vpn to work through NAT. On one end of the vpn, there was a PIX and on the other end was a cisco 2600 router. The guy that was helping me fixed it by ...
