I have a ipsec/vpn on FreeBSD 6.3 from one master server to another server the one has multiple jails. each jail has is own public IP and i need to do something like this:
vpn point >------...
How can I configure ipsec connection?
Hi There,
My Cisco pix 515e vpn tunnel gives an error message version 6.3(5) to version 7.0(4).
it gives error message IKMP_NO_ERR_NO_TRANS in phase 2
Error Message:
ISAMKP (0): receive...
I'm looking for a VPN solution for mobile users.
We've been using the built in Server 2k3 vpn, but have had problems with connectivity behind different routers, Linksys especially seems to ...
Hello,
I was running Cisco VPN Client ver 4.6 on my PC at home and a laptop at work. I upgraded the work laptop to version 5 and tested it using a dial-out connection and everything worked g...
I have configured a Juniper firewall for site to site vpn with a pix. Everything seems ok on the Juniper so now i'm looking at the pix for problems. I'm a total newbie to pix.
no crypto...
Anyone have a clue whats going on here with my VPN and how to fix it
t ppp # pppd call msvpnclient
pppd options in effect:
debug # (from /etc/ppp/peers/msvpnclient)
nodetach ...
i setup a microsoft IAS and VPN server. I have a watchguard firebox1000 firewall and with a specific external ip address on it that i want to use just for vpn purposes. i need to forward the ...
I want to connect a VPN to my system and have bought a Linksys BEFVP1 router which sits behind a Belkin F507231-4 router. As I only want to use the VPN capabilities of the Linksys I have switc...
Hi guys,
Hopefully this is an easy but I've been stumped for the last 2 months or so. With regards to an ASA/PIX, you can achieve this easily by the same interface traffic permit rule. I do...
Experts,
I have in place a VPN setup however I need an opensource ipsec client to establish a connection on the client workstations.
I have found a few opensource ones, however I am a li...
Hello.
Is it possible to get L2TP/IPSec to work with a securepoint VPN server / Firewall when the outgoing interface of the VPN server (Securepoint) is behind a NetGear FVX538 router and he...
I am using cisco VPN to open a tunnel. It is working over IPSEC.
What I want to do is once i use the CISCO vpn software it will use a different default gateway to access this network. Pl...
HI
I have 2 Sonicwall TZ 170 standard OS. I configured a VPN tunnel to connect the two subnet 10.0.0.0, 192.5.6.0 sometimes iam abel to bing the remote lan adress or even to access the confi...
Im working on a hypothetical situation at the moment and any advice will be greatly appreciated
Im currently trying to work out if it would be possible to have an IPsec tunnel connect a sat...
I cannot connect to Cisco ASA 5505 via Remote Access VPN. Here is the configuration file dan the log. Please take a look.
Thank U
Hello all,
I'm having some issues in establishing a Lan to Lan tunnel between a Cisco 2801 and a PIX 515 (7.2). Essentially, the C2801 is configured for both remote access connections, as w...
I connect to my office from my home via a hardware VPN. At the office, we have a Watchguard router and at my home, a Netgear DG834. However, the connection is very flakey - it drops and reco...
After rebuild of AD cannot login to exchange using outlook client. Credentials asked for over and over. OWA works fine.
Hi,
I'm having some troubles configuring a VPN Tunnel between a DFL-200 and a DFL-700.
The situation is the following.
The DFL-200 is behind an ADSL modem/router with LANIP 192.168.1....
I've configured my Mac OS X Server on my local network as a VPN server. I've tested the configuration from another MacBook Pro that I have on my network as well. I've connected to another wi...
All,
I created a vpn tunnel between my office (Cisco ASA 5520) and home (SonicWall TZ 170 StandardOS)using 3DES MD5, Aggressive Mode and PFS. My home network is using 192.168.90.0/24 and i...
I am currently trying to configure a pair of Cisco ASA 5505s. The requirement is a site to site VPN plus user VPN's into one of the sites. The site to site is working fine. However - I can't s...
How do I get the VPN tunnel to start automatically after reboot? I am connecting a Cisco 857W at our branch office to our main office pix 515E. I am using the SDM to create the tunnels with...
Hi there this is my first question I have listed here.I hope someone can assist me in resolving my issue
I am attempting to establish a VPN tunnel from a Cisco 515 dmz interface over 10 mbp...
