New user inherited CISCO PIX525 I only know GUI
VPN set up 2 ways have 4- persistant connections (point to point - preshared keys)
VPN clients for sales people who connect from internet conn...
Hi, as it says on the tin really. I have a cisoc 1841 ADSL router at the office and I want to use the cisco vpn client on my PC to connect to a pix at a customers site. What ports do I need to...
I am trying to set up an IPsec VPN tunnel to a provider of a data service. I am using a Windows 2003 Server as my gateway and I have set up the IPsec records correctly I think. My gateway has ...
I want to connect a VPN to my system and have bought a Linksys BEFVP1 router which sits behind a Belkin F507231-4 router. As I only want to use the VPN capabilities of the Linksys I have switc...
I have configured a Juniper firewall for site to site vpn with a pix. Everything seems ok on the Juniper so now i'm looking at the pix for problems. I'm a total newbie to pix.
no crypto...
I have Asterisk and Quintum Voice Gateway AS200, this one have 2 port /FXS and FXO.
My problem is, How to configure FXO port on AS200 to work with Asterisk???
I am attempting to setup a VPN Tunnel between a Cisco PIX 515E and a Linksys BEFSX41. When I first setup the tunnel it came up and worked just fine for several hours. I have defined the time...
I would like to setup WebVPN for the ASA 5510.
What I would like it to do is go to the web server we have and pass credentials to it.
Is this possible?
Please advise configuration.
...
Hello experts!
Our company uses Ingersoll Rand HandPunch 4000A as our Punch Clocks. They have a built-in Ethernet Card to communicate with "eTime" the Punch tracking software.
One of our...
Hello,
I have two Netopia R910 routers on different subnets miles apart that I am attempting to establish an IPSec VPN tunnel accross. The main goal is to have a always-on VPN tunnel to do ...
I am using a Cisco ASA 5520 with three site-to-site VPN using ACL nonat and nat (inside) 0 access-list nonat. see below
access-list nonat extended permit ip 10.0.0.0 255.0.0.0 172.16.249.0 25...
Hi,
I was asked to set up a new site-to-site VPN Tunnel with one of our associates. I have their IP address and the subnet class C that we need access to.
I told them that our Internal C...
hi
we are useing MPLS backbon running with BGP routing protocol now the chalange is to set encryption between sites how we can achive it i was trying with IPSEC tunnel but it is giving me MTU...
I have setup a site to site VPN that connects without a problem. My main concern is that on one end is a SBS2003 server that handles all DHCP assignments and for some reason I am unable to ge...
I'm having trouble getting a Site-to-Site VPN stood up between a couple of ASA 5510's at remote locations. It doesn't look like the two ASA's are even attempting to bring up the tunnel - "sho...
hello
I would need someone to test something for me.
I have been working with Micorsoft support ( for hours) on an vpn port issue and we are at odds.
our server was running PPTP vpn con...
Hi,
I am attempting to create an IPSEC tunnel between the office LAN (using ISA Server) and my home office which uses a Cisco 1841 router. I have a tunnel of sorts up, but cannt pass any tra...
Hi
Remote user is connected to our London office over VPN, using Dlink VPN router (DI-804HV).
They have an Avaya IP Phone 4620, connected to their LAN, and connects fine to office
How...
I am
> new to Cisco and am having some problems. I am referring to this:
>
> http://www.experts-exchange.com/Security/Software_Firewalls/Q_22016322
> .html
>
>
>
>
>
> I am set...
I have a client who has a 3cr870-95 router in place. It connects up very well to the remote VPN gateway (this is a site to site VPN, not a client>gateway). However, at seemingly random times...
I have a Cisco PIX 515E and I am connecting to it with Cisco VPN Client 4.8 from one of my sites. The VPN Connection get established, howver i cannot ping any IP Address within the network. Th...
Hello
I put a visual html page in my website and fully explain the whole procedure of making a vpn connection for my users there .but always there are customers that encounter problem during...
We have a development server that suddenly suffered a loss of most network connectivity Friday evening. It could be pinged but it was not possible to connect to it in any way, and if logged i...
I recently had trouble getting an IPSEC vpn to work through NAT. On one end of the vpn, there was a PIX and on the other end was a cisco 2600 router. The guy that was helping me fixed it by ...
How do I set up a VPN tunnel on an ASA 5520. Basically the equipment will be 5520 located at our colo and px 501's at remote sites.
