I've got an ASA 5505 Running ASA IOS 7.2(2) with VPN over IPSec enabled. I use the ASA's internal user list for user authentication and I use group authentication to get into the VPN. I have a...
I'm trying to setup a VPN between a machine running Vista Enterprise and a Netscreen 208.
I do not want to use the netscreen remote client ( we do use this successfully on other vista machi...
Trying to create a site to site VPN with a Cisco ASA 5510 (8.0.3) and PIX 501 (6.3.5). It seems like the tunnel is established correct but the traffic does not get thru. I can see the client c...
Cisco PIX 515
Pix Ver: 7.2(4)
ASDM Ver: 5.2(4)
I recently upgraded our PIX from 6.3 to 7.2 in order to do L2TP/IPSEC VPN with our Windows Clients. Currently we have 4 site to site stati...
I just purchased this linksys router and trying to configure it for one of our remote offices to connect to my main office. but reguardless of how I configure it, I seem to consistently get th...
Two offices have been using the FVS336G firewall/vpn for IPSEC VPN connections without problems. Recently, one office was no longer able to connect via the VPN. (The other office has other V...
Hello all,
I'm having some issues in establishing a Lan to Lan tunnel between a Cisco 2801 and a PIX 515 (7.2). Essentially, the C2801 is configured for both remote access connections, as w...
Hi, I just setup an ASA 5505 and it works great, but I am having problems with a site to site VPN. I receive the information form the peer as follows:
Peer IP Address: 165.243.179.23
Pres...
Hi guys,
Hopefully this is an easy but I've been stumped for the last 2 months or so. With regards to an ASA/PIX, you can achieve this easily by the same interface traffic permit rule. I do...
Hello
When I want to establish a VPN Connection using L2TP/IPsec, the client cannot connect. Aftere about 10 seconds, the following message is displayed:
Error: 789 "The L2TP connection ...
Hi there this is my first question I have listed here.I hope someone can assist me in resolving my issue
I am attempting to establish a VPN tunnel from a Cisco 515 dmz interface over 10 mbp...
We have several BOVPN's and they all seem to have stability issues. They'll connect and work but several times a day they'll drop 5 to 10 packets which is just long enough to interfere with n...
I want to connect a VPN to my system and have bought a Linksys BEFVP1 router which sits behind a Belkin F507231-4 router. As I only want to use the VPN capabilities of the Linksys I have switc...
Is there a way to setup a ipsec vpn to a router that has a single internet connection from a router that has multiple internet connections. Basically we have a remote site and have two dsl lin...
I cannot connect to Cisco ASA 5505 via Remote Access VPN. Here is the configuration file dan the log. Please take a look.
Thank U
Im working on a hypothetical situation at the moment and any advice will be greatly appreciated
Im currently trying to work out if it would be possible to have an IPsec tunnel connect a sat...
When ipsec is enabled on DC and clients , login to domain takes over 10 minutes, (I don't know at last could the client login or not, because I didn't wait. but it seems that authentication is...
Hi everyone-
I'm configuring multiple sites on an ASA 5520 (8.0.3-k19) using EasyVPN with PIX501 (6.3.5) on the remote end.
PIX firewalls are not staying connected, and one site is showi...
After rebuild of AD cannot login to exchange using outlook client. Credentials asked for over and over. OWA works fine.
New user inherited CISCO PIX525 I only know GUI
VPN set up 2 ways have 4- persistant connections (point to point - preshared keys)
VPN clients for sales people who connect from internet conn...
Hi, as it says on the tin really. I have a cisoc 1841 ADSL router at the office and I want to use the cisco vpn client on my PC to connect to a pix at a customers site. What ports do I need to...
Hello,
I have two Netopia R910 routers on different subnets miles apart that I am attempting to establish an IPSec VPN tunnel accross. The main goal is to have a always-on VPN tunnel to do ...
I am in the process of migrating my site-to-site VPN traffic from a PIX506e to an ASA5510 at our main office. The current site-to-site is between the PIX506e at the main site and a PIX501 at ...
I used the CISCO SDM to setup my router configuration including an EZ VPN. I can connect to my VPN remotely, and get an IP address on the same subnet at the rest of the computers that I want t...
FW1# sh run
: Saved
:
ASA Version 7.2(3)
!
hostname FW1
domain-name FW1.inVentive.com
enable password YHrwM55jgJhVNbCL encrypted
names
!
interface Vlan1
nameif outside
security-l...
