I'm trying to configure a VPN tunnel thru internet between 2 Cisco PIX firewall but I'm getting errors from the debug modes of my routers. I'd appreciate any help you can provide for this issu...
I currently have an IPSec based VPN running between a Cisco ASA and a Cisco 2801. I'm moving my VPN connections off of the ASA over to a Cisco VPN concentrator 3005, which is in my DMZ. I'm ...
Can anyone tell me if there is a Delphi version of this routine out there to calculate the TCP checksum
/*
**************************************************************************
Funct...
I have a situation where my company has a site to site VPN with static addresses on both sides. The Vice President has just had an ASA device set up at his home and he has a Dynamic IP address...
Hi
Remote user is connected to our London office over VPN, using Dlink VPN router (DI-804HV).
They have an Avaya IP Phone 4620, connected to their LAN, and connects fine to office
How...
Hi,
I have an urgent requirement to setup a temporary software VPN remotely between two sites, they were VPN linked between the gateways, but a hardware failure is now preventing this and I...
Hi .... I've set up three sites in a fully meshed VPN site-to-site network which works fine except when I add the client VPN config. As soon as the client VPN config is added the LAN at each s...
I have a unique situation where devices I have running Windows XP Embedded need to upgrade the firmware on a particular card. The card itself has two NICs, one internal, and one external. Th...
I recall long ago that that there is some procedure whereby you can create your .pcf files and then bundle those up with the Cisco VPN client as an .exe file that can then be installed on your...
I enabled Secure Server (Require Security) on my DC OU and also enabled Client (Respond Only) on domain OU. After that, when the client pc tried to login to my doamin, it stuck at "Loading you...
Hello Experts -
We have a hub and spoke WAN network infrastructure with ASAs at all of the branch. To make this simple, let's call it Site 1, Site 2, and Site 3 where Site 2 is the HQ. We...
I have succesfully established the VPN Tunnel between an ASA 5510 and an ASA 5505, but i can't pass any traffic through the tunnel. Please help, kind of in a hurry
How do I pass VPN ports through a Cisco 1720 to an internal ISA serving up the actual VPN connections?
Get the following error continuously on a Terminal Server with the Cisco VPN Vlient software on it. The CLient is used in conjunction with MYOB Accountants Office to dial in to lodge tax retur...
can any one tell me what configuration I need to change to eliminate this problem.
Hi All,
I have a site to site VPN, both ends are running Netgear FVS 318 v3 firmware v3.0_26RC1 (ipsec tunnel, Encryption. 3Des, Algorithm SHA-1, SA Life Time 86400). Here is my problem, at h...
Dear Experts:
I am dealing with a bizarre issue. If our internet connectivity goes down, we cannot re establish our L2L tunnel with our remote offices. In order for us to reconnect the tunn...
Here's the topology:
ISP --------------------> Cisco 2821 router -------------------------> Linux Shorewall --------------------> LAN
76.191.16.44/24 76.191.55.1...
I am in the process of setting up a new facility. I have a vendor who is going to be onsite and will have his own network. I have a cisco 2811and I am in the initial configuration stage, so ...
I am trying to configure a VPN client group policy. The remote clients never successfully authenticate with the central site router. What am I missing. Thanks.
Question:
Attempting to connect to a client site via VPN. Client IT person gave me approriate IP address of host, IPsec "pre-shared key for authentication", user name & password. Other inst...
I have a windows server 2003 operating at one end inside a router (PPTP) and a simple VPN client at the other. I can connect without any problems however when i install my anti virus /softwar...
