I am new to Cisco Security products. I have an ASA5505 ASA Version 7.2(2) ASDM Version 5.2(2). I have a basic configuration working so that I can connect through the ASA5505 to the Internet. I am now trying to set-up a Remote VPN connection using Cisco VPN Client (Version 4.8.02.0010). Client Transport options, enable transparent tunneling, IPSec over TCP, TCP PORT 10000. The PC OS is XP Pro SP2. The XP Firewall is off.
When I try to connect via VPN, the following error is displayed, "Secure VPN connection terminated locally by client. Reason 414 failed to establish a TCP connection". The Client log displays "Unable to establsh TCP connection on port 10000 with Server 81.149.152.50.
ASA5505 Config:
Saved
:
ASA Version 7.2(2)
!
hostname METSOASA5505
domain-name HQL.CO.UK
enable password iMqdEu1GJUXUCab4 encrypted
names
!
interface Vlan1
nameif inside
security-level 100
ip address 10.66.252.14 255.255.252.0
!
interface Vlan2
nameif outside
security-level 0
ip address 10.0.0.1 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
dns server-group DefaultDNS
domain-name HQL.CO.UK
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list outside_access_in extended permit ip any any
access-list outside_access_in extended permit tcp any any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit tcp any any
access-list inside_access_out extended permit ip any any
access-list inside_access_out extended permit tcp any any
access-list outside_access_out extended permit ip any any
access-list outside_access_out extended permit tcp any any
pager lines 24
logging enable
logging asdm debugging
mtu inside 1500
mtu outside 1500
ip local pool Metsovpn 10.66.252.30-10.66.252.40 mask 255.255.252.0
no failover
monitor-interface inside
monitor-interface outside
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (inside) 1 interface
global (outside) 1 10.0.0.5-10.0.0.10 netmask 255.255.255.0
nat (inside) 1 10.66.252.0 255.255.252.0
access-group inside_access_in in interface inside
access-group inside_access_out out interface inside
access-group outside_access_in in interface outside
access-group outside_access_out out interface outside
route outside 0.0.0.0 0.0.0.0 10.0.0.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
group-policy Metso internal
group-policy Metso attributes
dns-server value 10.66.253.104 10.66.253.103
vpn-tunnel-protocol IPSec l2tp-ipsec webvpn
default-domain value hql.co.uk
username Metsovpn password ZbPXbO49HFwV2nFW encrypted privilege 0
username Metsovpn attributes
vpn-group-policy Metso
http server enable
http 10.66.252.0 255.255.252.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 20
tunnel-group Metso type ipsec-ra
tunnel-group Metso general-attributes
address-pool Metsovpn
default-group-policy Metso
tunnel-group Metso ipsec-attributes
pre-shared-key *
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:003b0ce4f22
2eeb7ff3b5
a5fe979591
7
: end
asdm image disk0:/asdm-522.bin
no asdm history enable
The connection on the Outside port of the ASA5505 is to a BT Voyager 220V ADSL Router. The Router is then connected to a BT ADSL line. The Routers Static Internet address is 81.149.152.50. LAN Address 10.0.0.2/24. The ASA5505 outside address is 10.0.0.1/24. Inside address 10.66.252.14/22. The LAN the ASA5505 is connected to is 10.66.252.0/22.
When trying to connect via VPN, the VPN LED on the ASA5505 shows no activity. The log on the ASA5505 shows no messages related to VPN. The VPN statitics are all zero. Therefore it looks like the ASA5505 does not see the VPN connection trying to establish at all. Is the problem therefore the configuration of the BT Router ? Does the Router need to be in Bridging Mode ?
Start Free Trial
