Cisco ASA 5500 VPN failure

So I've been having a huge problem trying to get the built in windows VPN client to connect to the VPN firewall.  From what I understand you have to use L2TP in order to connect vs pptp.  So I have the client configured using CHAPv2 and set the PSK under the IPSec.  I'm testing using a XP client.  I have the firewall configured, it isn't doing anything fancy at the moment other then just routing traffic.  When I try to connect with the XP client it takes about 3 mintues and times out with an error 792 saying the L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.  Listed below is the running config off the ASA.  

i've replaced public IP and the domain name with X's for security

ASA Version 7.2(3)
!
hostname ciscoasa
domain-name X
enable password cdiBU54RPlPPPI5. encrypted
names
name 192.168.10.253 Barracuda description Spam Filter
!
interface Vlan2
 nameif inside
 security-level 100
 ip address 192.168.10.254 255.255.255.0
!
interface Vlan3
 nameif outside
 security-level 100
 ip address X.X.X.X 255.255.255.248
!
interface Ethernet0/0
 switchport access vlan 3
!
interface Ethernet0/1
 switchport access vlan 2
!
interface Ethernet0/2
 switchport access vlan 2
!
interface Ethernet0/3
 switchport access vlan 2
!
interface Ethernet0/4
 switchport access vlan 2
!
interface Ethernet0/5
 switchport access vlan 2
!
interface Ethernet0/6
 switchport access vlan 2
!
interface Ethernet0/7
 switchport access vlan 2
!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
 name-server 192.168.10.10
 name-server X.X.X.X
 domain-name X
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list inside_access_out extended permit ip any any
access-list outside_access_out extended permit ip any any
access-list Management_access_in extended permit ip any any
access-list inside_access_in extended permit ip any any
access-list outside_access_in extended permit tcp any interface outside eq ftp
access-list outside_access_in extended permit tcp any interface outside eq ftp-data
access-list outside_access_in extended permit tcp any interface outside eq www
access-list outside_access_in extended permit tcp any interface inside eq ssh
access-list outside_access_in extended permit tcp any interface outside eq smtp
access-list outside_access_in extended permit ip any any inactive
access-list inside_nat0_outbound extended permit ip any 192.168.10.0 255.255.255.128
access-list inside_nat0_outbound extended permit ip any 192.168.10.64 255.255.255.224
access-list inside_nat0_outbound extended permit ip any 192.168.10.32 255.255.255.224
access-list inside_nat0_outbound extended permit ip any 192.168.10.48 255.255.255.240
access-list inside_nat0_outbound extended permit ip any 192.168.10.16 255.255.255.240
access-list outside_cryptomap_65535.20 extended permit ip any interface outside
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool Default 192.168.10.60-192.168.10.65 mask 255.255.255.0
ip local pool test 192.168.10.20-192.168.10.25 mask 255.255.255.0
ip local pool clientVPNpool 192.168.10.80-192.168.10.90 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
asdm history enable
arp timeout 14400
global (outside) 101 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 101 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface ssh Barracuda ssh netmask 255.255.255.255
static (inside,outside) tcp interface smtp Barracuda smtp netmask 255.255.255.255
static (inside,outside) tcp interface ftp 192.168.10.9 ftp netmask 255.255.255.255
static (inside,outside) tcp interface www 192.168.10.9 www netmask 255.255.255.255
access-group inside_access_in in interface inside
access-group inside_access_out out interface inside
access-group outside_access_in in interface outside
access-group outside_access_out out interface outside
route outside 0.0.0.0 0.0.0.0 X.X.X.X 255
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
aaa authorization command LOCAL
http server enable
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
no sysopt connection permit-vpn
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set TRANS_ESP_DES_MD5 esp-des esp-md5-hmac
crypto ipsec transform-set TRANS_ESP_DES_MD5 mode transport
crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set L2TP esp-des esp-md5-hmac
crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_65535.20
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set L2TP TRANS_ESP_3DES_MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable inside
crypto isakmp enable outside
crypto isakmp policy 10
 authentication pre-share
 encryption 3des
 hash md5
 group 2
 lifetime 86400
crypto isakmp policy 70
 authentication pre-share
 encryption des
 hash md5
 group 2
 lifetime 86400
crypto isakmp nat-traversal  20
crypto isakmp ipsec-over-tcp port 10000
crypto isakmp disconnect-notify
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 192.168.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcp-client broadcast-flag
dhcpd auto_config outside
!

!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect rsh
  inspect rtsp
  inspect esmtp
  inspect sqlnet
  inspect skinny
  inspect sunrpc
  inspect xdmcp
  inspect sip
  inspect netbios
  inspect tftp
!
service-policy global_policy global
webvpn
 tunnel-group-list enable
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
 wins-server value 192.168.10.10
 dns-server value 192.168.10.10
 vpn-tunnel-protocol IPSec l2tp-ipsec
 default-domain value a-ddraft.local
group-policy DfltGrpPolicy attributes
 banner value You are connected.  Authorized users are only allowed.  All activity is being logged.
 wins-server none
 dns-server none
 dhcp-network-scope none
 vpn-access-hours none
 vpn-simultaneous-logins 3
 vpn-idle-timeout 30
 vpn-session-timeout none
 vpn-filter none
 vpn-tunnel-protocol IPSec l2tp-ipsec
 password-storage disable
 ip-comp disable
 re-xauth disable
 group-lock none
 pfs disable
 ipsec-udp disable
 ipsec-udp-port 10000
 split-tunnel-policy tunnelall
 split-tunnel-network-list none
 default-domain none
 split-dns none
 intercept-dhcp 255.255.255.255 disable
 secure-unit-authentication disable
 user-authentication disable
 user-authentication-idle-timeout 30
 ip-phone-bypass disable
 leap-bypass disable
 nem disable
 backup-servers keep-client-config
 msie-proxy server none
 msie-proxy method no-modify
 msie-proxy except-list none
 msie-proxy local-bypass disable
 nac disable
 nac-sq-period 300
 nac-reval-period 36000
 nac-default-acl none
 address-pools none
 smartcard-removal-disconnect enable
 client-firewall none
 client-access-rule none
 webvpn
  functions url-entry
  html-content-filter none
  homepage none
  keep-alive-ignore 4
  http-comp gzip
  filter none
  url-list none
  customization value DfltCustomization
  port-forward none
  port-forward-name value Application Access
  sso-server none
  deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information
  svc none
  svc keep-installer installed
  svc keepalive none
  svc rekey time none
  svc rekey method none
  svc dpd-interval client none
  svc dpd-interval gateway none
  svc compression deflate
username tesguerra0314 password 1YGH8j5H7n8HJu9n encrypted privilege 15
username test password DLaUiAX3l78qgoB5c7iVNw== nt-encrypted
username lewan password WZh3VLk/AB65j3D0 encrypted privilege 15
tunnel-group DefaultL2LGroup ipsec-attributes
 pre-shared-key *
 peer-id-validate nocheck
 isakmp keepalive threshold infinite
tunnel-group DefaultRAGroup general-attributes
 address-pool Default
 address-pool test
 address-pool clientVPNpool
 authorization-server-group LOCAL
 default-group-policy DefaultRAGroup
 dhcp-server 192.168.10.10
tunnel-group DefaultRAGroup ipsec-attributes
 pre-shared-key *
 isakmp keepalive disable
tunnel-group DefaultRAGroup ppp-attributes
 no authentication chap
 authentication ms-chap-v2
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command uauth
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no compression svc http-comp
zonelabs-integrity interface outside
Cryptochecksum:618f013ec7d4859f3d5b818fb408c9c6
: endStart Free Trial