After using the ASDM wizard to setup the tunnel between two ASA 5510, I still cannot communicate between the local inside network and the remote inside network. Can anyone please take a look...
I am having an issue getting some VPN clients to connect to the VPN concentrator and actually establish the connection.
I am using the following:
Cisco 3000 series VPN concentrator
Cisco ...
I'm having trouble creating a VPN tunnel between a Cisco ASA 5510 v 7.0(6) and a Firebox X7506 v8.3. I've successfully connected another office using a Cisco PIX 515 to this FireBox using the...
I am trying to set up a Site-to-Site VPN network. Right now I am trying to make this work in the lab. I have the Internet port on the Linksys connected directly to port 0 on the cisco which wa...
So I've been having a huge problem trying to get the built in windows VPN client to connect to the VPN firewall. From what I understand you have to use L2TP in order to connect vs pptp. So I...
I have an XP pro laptop. I recently ran XP repair to fix an issue where the laptop would blue screen after 5 minutes of being turned on consistently. After the repair I installed all OS patc...
I have a PIX 515E Unrestricted License located at my collocation facility. I have remote access IPSec set up on this firewall and we use the Cisco Systems VPN Client ver. 4.8.01.0300. I hav...
Hi folks,
I'm installing a Cisco ASA 5510 and I want my users to VPN in using the Cisco Client and IPSec, authenticating to a Windows 2000 RADIUS Server.
This is my first ASA install, an...
I've got an ASA 5505 Running ASA IOS 7.2(2) with VPN over IPSec enabled. I use the ASA's internal user list for user authentication and I use group authentication to get into the VPN. I have a...
Hi All,
I have an issue with configuring an ASA 5510 (I will post the config if neccessary). I would like to be able to have my VPN clients who have an address of 10.1.10.X to route across...
The company I work for utilizes a Cisco VPN (Cisco VPN Client 4.8.01.0300) to back-up and share data. There is one person having difficulty connecting to the VPN. She is running a PC with Win...
Replaced PIX with ASA 5510 v8.02. Tunnel comes up when traffic is sent, but no traffic gets through.
Not sure what I"m issing. Traffic for other tunnels (not listed in config get through)....
On installing Nortel VPN software on my laptop, it appears I can only use the wireless card to access VPN. When I try using the inbuilt ethernet port, I get the following error immediately whe...
I have a Cisco ASA 5505. I have the initial setup working fine. I have not setup a VPN before and, using the ASDM VPN Wizard configured it the way that seemed correct to me. I am using the Cis...
We use a Cisco VPN 3015 concentrator and the Cisco VPN Client for remote access to our network. I am using one of our first Vista machines. On our XP machines which run the 4.8 version of th...
I have a Cisco ASA 5510 that I am trying to configure for remote access VPN. I need it to work with regular OS -based VPN clients in addition to Cisco's client. I think to make this work I w...
Hi,
I am configuring a IPSEC VPN tunnel between 2 x 1841's and this is the first time I have ever attempted this.
This is a lan-lan vpn. The local lan is the 10.5.11.0/24 range and the r...
I'm trying to setup a VPN between a machine running Vista Enterprise and a Netscreen 208.
I do not want to use the netscreen remote client ( we do use this successfully on other vista machi...
Hello all,
I'm having some issues in establishing a Lan to Lan tunnel between a Cisco 2801 and a PIX 515 (7.2). Essentially, the C2801 is configured for both remote access connections, as w...
Cisco ASA vpn can not be established correctly. Every time I try adding a crypto dynamic-map I get a warning i.e. " WARNING: Existing map is being linked to dynamic-map: vpn_map.
Al...
We have several sites that all connect to the main site through an IPSec VPN tunnel over 1.5 mbps DSL. The latest site we set up is having problems not being able to login and stay logged in t...
Hello
When I want to establish a VPN Connection using L2TP/IPsec, the client cannot connect. Aftere about 10 seconds, the following message is displayed:
Error: 789 "The L2TP connection ...
I have a Windows 2000 SBS domain, Fortigate 60 Firewall and remote connections via Forticlient VPNs. The VPN (IPSec) client will always connect to the host ok, and I can connect Outlook to our...
Trying to create a site to site VPN with a Cisco ASA 5510 (8.0.3) and PIX 501 (6.3.5). It seems like the tunnel is established correct but the traffic does not get thru. I can see the client c...
Hi All,
I have two offices with a PIX 515 at one end and a PIX 506E at the other. On the site with the 506E we also have call manager express running with 6+ IP phones connected. On the sit...
