I am using remote access VPN, i have tested from my home, my friends home its working fine. When a user tries to connect from my overseas office he is getting error remote peer not responding....
I need instruction on creating and authenticating a vpn certificate for individual user. So that certificate can be requested, issued and athenticated from outside the network. I need to know ...
Hello all,
I'm having some issues in establishing a Lan to Lan tunnel between a Cisco 2801 and a PIX 515 (7.2). Essentially, the C2801 is configured for both remote access connections, as w...
Hi
We have a Cisco 1841 configured for VPN using the Microsoft L2TP/IPSec connection. This is working at the moment but we want to move over to using the Cisco VPN Client.
I have the ...
Hi All,
I have two offices with a PIX 515 at one end and a PIX 506E at the other. On the site with the 506E we also have call manager express running with 6+ IP phones connected. On the sit...
We currently have an ASA carrying traffic for 160 branch offices. Our ISP is providing all IPSec tunneling as part of a managed service. I am wanting to move 84 of our "Off Net" branches provi...
Hi, I just setup an ASA 5505 and it works great, but I am having problems with a site to site VPN. I receive the information form the peer as follows:
Peer IP Address: 165.243.179.23
Pres...
I am unable to establish a gateway to gateway VPN using Linksys RVS4000 boxes at each end. I am using IPsec. At one end I have a cable modem that is passing a public static IP directly to th...
We have a Sonicwall TZ 170 setup as vpn with DHCP (Sonicwall is only DHCP server on the lan) over VPN/Central Gateway/Use Internal DHCP server for global vpn client.. My issue is two-fold:
...
Hi Experts,
We have a Cisco VPN Concentrator 3000 with numerous site to site lans.
We are moving to a new Cisco ASA 5520 and i am trying to configure the site to sites on the ASA.
We have N...
Two offices have been using the FVS336G firewall/vpn for IPSEC VPN connections without problems. Recently, one office was no longer able to connect via the VPN. (The other office has other V...
Having problems trying to setup a PIX to accept IPSEC tunnels from both remote clients using Cisco VPN Client as well as a site-to-site tunnel connecting to a Linksys WRVS4400N. Everything is ...
I am trying to set up a site-to-site VPN from a WatchGuard Firebox X750e (Fireware v8.3) and a WatchGuard SOHO 6 (v6.4.1). I believe the tunnel is setup correctly but I cannot get traffic to p...
Hi There,
My Cisco pix 515e vpn tunnel gives an error message version 6.3(5) to version 7.0(4).
it gives error message IKMP_NO_ERR_NO_TRANS in phase 2
Error Message:
ISAMKP (0): receive...
Hi,
I have a VPN setup problem with my Cisco IOS.
I set up the VPN and when I trigger the traffic to the other peer's VPN domain the VPN comes up smoothly and the IKE and IPSec security as...
Hi , i want to connect my two branches through private network everything fine with me my all configuration are the same that I did it before and i have less more experience of Cisco PIX espec...
I recently replaced a SonicWALL PRO 3060 with a Cisco ASA 5510, and I'm having problems with my VPN tunnels and RIP routing. My remote sites have SonicWALL TZ170s, and I could have them send ...
I am trying to connect to a Watchgaurd Firebox X1000 running WFS v7.4 with a Windows Vista Ultimate 64-bit machine. SafeNet won't be coming out with a client for a while, so I'm trying to us...
I have a Cisco 877-M with IOS 12.4(11)XJ3, Advanced IP Services and 28MB flash. I have set up the router as an Easy VPN Server. The client is Cisco VPN Client 4.9.0.1 (0030). The router has a ...
Experts,
I have in place a VPN setup however I need an opensource ipsec client to establish a connection on the client workstations.
I have found a few opensource ones, however I am a li...
Trying to create a site to site VPN with a Cisco ASA 5510 (8.0.3) and PIX 501 (6.3.5). It seems like the tunnel is established correct but the traffic does not get thru. I can see the client c...
I have a Suse 10.2 machine running on my company's network. I access the company's network using Cisco VPN client from my Windows based computer at home. I use Putty (ssh client) and Xming (...
Customer is currently have Verizon Fios Interet + Tv
Verizon is using a Actiontec Router
Actiontec router have a Coax Cable connect to it for the Ondemand to work.
Actiontec have a ip of ...
How can I configure ipsec connection?
This is the pertinent part of my config. I have aythetication set up on a radius server, but should I authenticate a simpler way before? I keep getting error 413...
interface GigabitEtherne...
