I have 3 locations, and need to make VPN tunnels between these locations. The locations have these specs.
Site 1: Main location with the servers hosting exchange, Domain controller and more...
I have a ipsec/vpn on FreeBSD 6.3 from one master server to another server the one has multiple jails. each jail has is own public IP and i need to do something like this:
vpn point >------...
I have a Cisco Pix 515E. It has 32mb of RAM and a Restricted license. I am currently running v6.3.5.
I am in the need to setup a DMZ for a spam filter box as well as setup either SSL VPN ...
I want to connect a VPN to my system and have bought a Linksys BEFVP1 router which sits behind a Belkin F507231-4 router. As I only want to use the VPN capabilities of the Linksys I have switc...
I have Asterisk and Quintum Voice Gateway AS200, this one have 2 port /FXS and FXO.
My problem is, How to configure FXO port on AS200 to work with Asterisk???
I have setup a VPN from our corp. site which uses ASA 5510, to a remote site with the watchdog. If the remote site initiates the traffic via ICMP the tunnel builds and it seems to work. Only t...
I am looking after a network with a Juniper Netscreen ns5gt-ads. I have never looked after a Netscreen before, and I'm having a little trouble connecting to the VPN. I'm fairly neub with IPSec...
Hello.
Is it possible to get L2TP/IPSec to work with a securepoint VPN server / Firewall when the outgoing interface of the VPN server (Securepoint) is behind a NetGear FVX538 router and he...
I would like to setup WebVPN for the ASA 5510.
What I would like it to do is go to the web server we have and pass credentials to it.
Is this possible?
Please advise configuration.
...
One user using the Cisco VPN client is getting different routes than everyone else. This user is therefore unable to ping the network, however the rest of the users are fine. e.g.
The weir...
I've configured my Mac OS X Server on my local network as a VPN server. I've tested the configuration from another MacBook Pro that I have on my network as well. I've connected to another wi...
I have a VPN tunnel created between a Cisco 3030 VPN concentrator and a Watchguard Firebox 700. The tunnel is up but I can't ping anything back and forth, when I look at the VPN concentrator, ...
I have a SnapGear SG550 at my main location doing IPSec tunnels for two remote loactions (for IP phones and network resources). The remote locations both have Linksys BEFSX41's and are configu...
I have a Cisco ASA 5505. I want to forward traffic to the webmail OWA.
How can i forward the users to the webserer to access their OWA Account. i don't want to use port 80 or 443.
Can somebo...
I am running multiple Clarkconnect boxes what are all connected by IP Sec over internet, this works very well to link the Lan, but what I want to do is have them all connect back to head offic...
Hello folks,
I have an ASA 5505 router, public range of 16 IP's, I have a client workstation behind the 5505 that does hide NAT/PAT.
I am having a bit of a problem configuring STATIC NAT fo...
How do I get the VPN tunnel to start automatically after reboot? I am connecting a Cisco 857W at our branch office to our main office pix 515E. I am using the SDM to create the tunnels with...
I have successfully installed Openswan on my Linux server (2.6.18, NETKEY) and done some initial configuration according to how-to at http://www.jacco2.dds.nl/networking/openswan-l2tp.html . A...
hello everyone,
i currently work ina business that provide broadband connections for clients whom rent office space. a client has asked if we can provide a static ip with ipsec? we do provi...
I am trying to configure a site to site vpn on a test network. One end has pix 515E and the other has ASA 5505. I configured each side with the vpn wizard provided by each firewall. Ain't ...
I Have a trouble with Roadwarrior VPN configurations between My Trustix enterprise firewall 4.7 and my Windows XP client. Here it is:
My roadwarrior XP pc
206.x.x.68 (it's my wan test)
...
We have two offices connected over an IPSEC tunnel. The main office has a PIX 515E running 6.3(1) and the remote office has a PIX 501E running 6.3.(5). Currently, each office accesses the In...
I am setting up a new SBS 2003 R2 (Standard) server but am stumped about the one nic or two question.
I know that general best practice is to install two nic's and host the internal networ...
Can i use the Cisco 2811 to route VPN traffic from different branch offices. So that each branch offices can be communicate to the headoffice as well as other branch offices.Also provide the p...
What is the best way to allow Remote VPN Access to users? The purpose is to allow technology to be able to troubleshoot when travelling.
We are looking for solutions on Cisco VPN Concentrato...
