Nortel VPN contivity has three types of logs. System logs, Security logs & event logs.
Could any one explain what are the parameters that are recorded in each of the logs.
I would like to kn...
I've set up VPN on a Windows 2003 SBS, but cannot connect from outside. I've forwarded ports 1723 for PPTP and IPSec 500 & 50-51 on the Etherfast® Cable/DSL Router BEFSR41 V3 Linksys Router (...
HI
I have 2 Sonicwall TZ 170 standard OS. I configured a VPN tunnel to connect the two subnet 10.0.0.0, 192.5.6.0 sometimes iam abel to bing the remote lan adress or even to access the confi...
I recently had trouble getting an IPSEC vpn to work through NAT. On one end of the vpn, there was a PIX and on the other end was a cisco 2600 router. The guy that was helping me fixed it by ...
Hello experts!
Our company uses Ingersoll Rand HandPunch 4000A as our Punch Clocks. They have a built-in Ethernet Card to communicate with "eTime" the Punch tracking software.
One of our...
We would like a server in a Remote Office to use the Main Office WAN (and its associated WAN IP) to access the public internet. We have purchased two NetGear VPN routers (FVS336Gs) and have su...
Hi All, Being having a little problem establishing a VPN connection into my LAN, via some USB modem. I know the VPN is working because other locations with other ISPs dials in fine. But this p...
hello
I would need someone to test something for me.
I have been working with Micorsoft support ( for hours) on an vpn port issue and we are at odds.
our server was running PPTP vpn con...
I have a client who has a 3cr870-95 router in place. It connects up very well to the remote VPN gateway (this is a site to site VPN, not a client>gateway). However, at seemingly random times...
I'm trying to set up a client's remote office setup for him, and I'm not sure what the best implementation of technologies would be. Originally, he had discussed just accessing Quickbooks fil...
Hi,
Can anyone recommend a VPN client other than Junipers own Netscreen remote client?
I am currently using the netscreen remote, but find that it is a bit flakey and was wondering if a...
I have a NS5XP and Cisco ASA 5505. I'm trying to set them up witha site to site VPN. I'm proficient with the ASA and I know the config is right. The NS I am not so good at.
The NS is at th...
I am based in NJ. I have a small operation in CA that rents a space in a larger facility and therefore is a part of their network. I need this CA facility to be able to connect via a remote ac...
I have a site to site vpn from a Cisco IOS router to Cisco IOS router. Both routers have an inbound ACL applied to the same interface as the crypto map. The ACL allows the IPSEC protocols in...
I am running a Sonic Wall Pro2040 and I am trying to connect to my client's network through a VPN I configured. I have verified their gateway's IP is correct, but I can't ping that address. Th...
I am currently trying to configure a pair of Cisco ASA 5505s. The requirement is a site to site VPN plus user VPN's into one of the sites. The site to site is working fine. However - I can't s...
I have a Cisco 2800 series router with the following IOS c2800nm-spservicesk9-mz.124-9.T7.bin. I need to configure an IPsec peer to peer vpn on it. When I enter the command " crypto ? " all i...
Hi, I have a home user who cannot get a connection to Cisco VPN Client. I'm using version 5.0.02, and there are two different IP addresses/routers/sites that it won't connect to, so it seems ...
I'm trying to configure a VPN tunnel thru internet between 2 Cisco PIX firewall but I'm getting errors from the debug modes of my routers. I'd appreciate any help you can provide for this issu...
Hi, as it says on the tin really. I have a cisoc 1841 ADSL router at the office and I want to use the cisco vpn client on my PC to connect to a pix at a customers site. What ports do I need to...
Hi everyone-
I'm configuring multiple sites on an ASA 5520 (8.0.3-k19) using EasyVPN with PIX501 (6.3.5) on the remote end.
PIX firewalls are not staying connected, and one site is showi...
How do I set up a VPN tunnel on an ASA 5520. Basically the equipment will be 5520 located at our colo and px 501's at remote sites.
Our remote offices are connected back to exchange via ipsec, users running outlook 2003 in the remote office can connect to the Exchange 2007 server over the IPSec link but Outlook 2007 user c...
I have a Cisco PIX 515E and I am connecting to it with Cisco VPN Client 4.8 from one of my sites. The VPN Connection get established, howver i cannot ping any IP Address within the network. Th...
I want to secure the traffic from a protected LAN environment to a DMZ web server. How can IPSec be used to do so? Will this affect internet access to the Web server?
