Get the following error continuously on a Terminal Server with the Cisco VPN Vlient software on it. The CLient is used in conjunction with MYOB Accountants Office to dial in to lodge tax retur...
Hi .... I've set up three sites in a fully meshed VPN site-to-site network which works fine except when I add the client VPN config. As soon as the client VPN config is added the LAN at each s...
We've been using a Netgear FVS318v3 with the Netgear VPN software. It has worked great. However, I just sent a working policy to one of our guys to use from home, and the client software say...
At out company, we had a Cisco PIX 506e firewall that we were using to create a VPN with our company in Japan. Over there, they have a Cisco PIX 515e. But our 506e went out on us, so I bough...
Hi all,
I've inherited some firewalls since my cisco colleague left. I haven't followed any cisco courses, but I'm getting the hang of it :)
There's just one part I'm not quite sure abou...
Hi!
We are setting up 2 sites thru the internet thru a VPN tunnel we use to have PIX 501 but the commands in the ASA are different. we tried using VPN wizzrd it finished but it did not create...
All,
I created a vpn tunnel between my office (Cisco ASA 5520) and home (SonicWall TZ 170 StandardOS)using 3DES MD5, Aggressive Mode and PFS. My home network is using 192.168.90.0/24 and i...
Hi,
I cant seem to connect to the vpn using the cisco vpn client 5.0, need someone to verify my config is correct?
Upon logging through the cisco client I get this message:
- Sev=Info/4 ...
I have a new Cisco PIX 506E. For the most part, I configured most of it using the CLI. When I thought I was just about finished, I opened up the PDM, and checked the VPN status.
It produced...
I am looking to implement ipsec for all internal traffic going to and from my servers, 2003 AD with two dc's. Though I know I can use kerberos for security, are there any other ramifications I...
I have setup a site to site VPN that connects without a problem. My main concern is that on one end is a SBS2003 server that handles all DHCP assignments and for some reason I am unable to ge...
FW1# sh run
: Saved
:
ASA Version 7.2(3)
!
hostname FW1
domain-name FW1.inVentive.com
enable password YHrwM55jgJhVNbCL encrypted
names
!
interface Vlan1
nameif outside
security-l...
I have succesfully established the VPN Tunnel between an ASA 5510 and an ASA 5505, but i can't pass any traffic through the tunnel. Please help, kind of in a hurry
I am trying to configure a VPN client group policy. The remote clients never successfully authenticate with the central site router. What am I missing. Thanks.
Hi Experts!
We have just started doing business with an overseas client (in the US.) We currently have a Frame Relay which is now proving too costly, and with the price and reliability of ...
what ever i do,I cannot save the conf because i keep getting this error.
% Invalid input detected at '^' marker
I have a voice T1 and need to setup a VPN between our company and a separate company that hosts our website in order to pass orders to us. Can I setup a VPN over a voice T1 or do I have to sw...
Internet EXTREMELY slow when connected to IPSEC VPN on Windows 2000 PC. I setup this VPN connection on 3 PC's - 1 Vista, 1 XP Pro, and 1 Windows 2000 Pro.
On ONLY the W2K machine the Inter...
The site with the Adtran router has a checkpoint firewall behind the router. The problem I have is the Exchange on the Adtran site keeps disconnecting from the exchage server located on the ot...
I enabled Secure Server (Require Security) on my DC OU and also enabled Client (Respond Only) on domain OU. After that, when the client pc tried to login to my doamin, it stuck at "Loading you...
I am trying to use the default Windows XP VPN connection wizard to connect to a Netscreen router. Are there any tutorails out there that would help me? The Netscreen client currently works on ...
I am looking for a firewall appliance solution that is compatible with Checkpoint VPN software. I aalready know that Sonicwall will not work. Any ideas?
I am attempting to connect a linksys BEFSX41 (using a dynamic IP) to a netscreen ns25 (with a static IP). I can get it to work if the linksys were to have a static IP, but as a static it wont ...
How do I allow ternimal server (remote desktop) access from the specific hosts only to the Windows 2003 server. I don't want to install the firewall on the server. I know it could be done wit...
I am attempting to get a site to multi-site vpn up and running. Our Honolulu office is the hub. One of the tunnels (Honolulu to CA) is working fine. The other tunnel goes to another PIX locate...
