I successfully ran inital setup of my new ML350 G5, using the RSBU after POST to change smart array controller 1 to the P400 (since that's what I've connected by SAS to the disk caddy) instea...
I recently installed windows 2000 server on my Dell Dimension E510. It came with windows XP but I wanted to use it as a server so i put Win2k Server. It installed everything correctly but I ...
Hello,
i wanted to update the firmware of the iLo2 from one of our BL460 G1 Blades.
But the password from the iLo2 has changed an nobody knows it.
So i want to reset the password through...
I have a Dell Poweredge R200 with Windows Server 2003 32bit on it. I'm attempting to format the server and install Windows Server 2003 64bit in its place. However the server has a RAID array a...
I have a Dell Poweredge 4600 with a PERC 3/Di controller that comes up with a message saying 'no boot device available'. You're giving the option of F1 to retry (to no avail) or F2 to enter S...
Greetings!
I have researched the heck out of this and have many more questions then answers so I thought I would go ahead and ask the experts.
First, our current server room is setup wro...
Good day, I am looking for Visio Stencils for EMC CX4 storage range and Dell PowerVault TL4000. I did have look at Visio Cafe, but they only have CX3 and no TL. Does anyone know where else i c...
Anyone know the default password for System Management Homepage in Linux? or even how to reset it in Red Hat 5 Enterprise
I have an old server, an IBM xSeries 360, which according to the documentation, can only support up to Ultra160 disks.
I'm having a hard time finding Ultra160 disk, while there are a lot of U...
We have an HP c7000 Blade enclosure with only 3 half-height blades in it currently. Our sales guy also shipped us 2 HP 30-Amp PDU's (power strips) for power... however we only have 20-Amp out...
I'm not 100% certain I've posted this in the correct location, but here goes...
We implemented a BES server approximately 4 weeks ago, and everything has been fine up until this past Monday...
I am about to buy a Dell PE 2950 III server but would like to clarify on hard drive specs.
What would be the difference in performance between these 2 types of hard drives:-
(1) 3.5" SAS 1...
We currently have a server that has some shared folders, which are all visible to any user. We have security to not allow some users from 'browsing' through the folder.
Is there a way to s...
I have an Intel Server s5000VSA with lates firmware and bios, running SBS200 + Trend Worry Free 5.
This is a custom system with 2 x Xeon 2.33Quad Active CPU's 4GB of ECC FB memory and 2 x 250...
I'm new to setting up ESXi so bear with me please..
I have read a lot of post on this and thought I knew how I was going to setup this up but now I'm questioning my plan.
I'm going to ha...
Is there any way I can increase capacity by taking a hard drive out and installing a larger one? And doing this to all hard drives until they have all been replaced? If so, can you please prov...
We have one HP Proliant ML350 G5 Server running the LATEST firmware as of Oct 29th, and MS Windows 2003 SP2 that locks up and get this neither Microsoft or the Lights Out Board report any prob...
How can i configure hpasm to disable ASR feature?
Description: Rack Mount Chassis
Product: ProLiant BL465c G1
Vendor: HP
Bios: Version: A13
OS: Redhat EL 4 AS
Hello,
I am trying to boot to the cdrom from the ok prompt (by typing "boot cdrom") on Sun V5120/V5220 Ultra SPARC T2 servers and receive the following error message:
Boot device: /pci@0...
I want to learn Vmware and I want to build a system to do so... This is the mb i looking at to build my server (ASUS P5BV-E/SAS LGA 775 Intel 3200 ATX Server Motherboard) http://www.newegg.co...
I have a small domain network of 20 users on a SBS 2003 server. All users are using WinXP Pro SP2. One user in particular lost his ability to log on to his PC with his profile. For some rea...
Just purchsed this server to be a DHCP server for our new phone system and it did not come with a Smart Start CD. All the ones I have seem to be all for the 300, 500 and 700 series and it ha...
A Client of mine has a HP Proliant ML110 G3 server running SBS 2003
and this week it has developed an annoying internal constant beep....
beep beep beep beep non stop. its driving people cr...
I need to install the monitoring software for the RAID array on an HP ML110 G5 server. I think I need something like HP Insight Manager, but I want to check a few things before I download it a...
I have install the HP Insight Manager and want to setup alerts for any h/w problem. HP WBEM and agents has been in stalled on each server. I have already setup the Automatic Event Handlings (O...
