I have a phone system using the new Trixbox CE 2.4.1 ISO version (but I had the same problem before when I trialled v2.2). I cant get call pickup to work and its sending me insane.
When a...
i need to port forward sip protocol to asterisk server so that remot phones can get connected. i have a linksys router
I'm completely blanked on this,
Goal:
To forward incoming calls to another number (800 number).
In my IVR I have press 1 for sales, 2 for support, etc. The support goes to my inside supp...
Hi All,
I want to develop the Call Barge Feature for Asterisk.
The meaning of the barge that I need is :
When there is a call exist , let's say between the local extension and some other po...
Dose any one know the setting for SIP Trunk between Mitel 3300 & AsteriskNOW server?
Hi, I have the following sip.conf and extensions.conf. I want to dial out using Pennytel. Can anyone help ?. Thanks.
I've been using Asterisk to redirect my sip calls to the sip providers.
What advantage is there in installing a Sip Proxy? Which do you recommend for my OS? How do I install it for my OS?
Hi Everyone,
I'm trying to place a video call between two Polycom PVX clients registered using SIP. Both are registered properly. When I attempt to call, the far endpoint does not ring. I g...
Ok...
I have several features enabled in features.conf.
I also have relaxdtmf turned on.
My featuredigittimeout is 2400
When a user types a * then the number for the corresponding fe...
We are setting up an asterisk server and the only problem we seem to be having is with Music on Hold.
When people call in and we put them on hold, it is silent. Does Music on Hold work with...
I need to build a dial plan and a configuratiion for an extensions.conf/sip.conf file(s) for a conferencing application within a small business office. The asterisk build will only be hosting ...
I have been using Trixbox for a while and it is running fine. We have an analog telephone line connected and both a SIP phone and an anlogue, using a FXO/FXS card.
The telephone company is...
THE PROBLEM:
-------------------
I cannot place any outgoing calls on our new T1 line. I can call other extensions without any trouble.
THE SPECS (most of them copied and pasted from t...
This is a tough question. I am trying to configure My asterisk and i dont know what script to use or a script... Basically a call comes in.
someone faxing to the fax server say the number t...
I would like to do a kind of round robin or find me feature where should a ph not be picked up after all interal options are tried then the call is forwarded to an outside line like a cell
I have 1 analog line plugged into my asterisk and also a sip provider registered on the server as well. What i want to do is send calls from the analog line to one extension and the sip number...
I am trying to create a SIP trunk to talkinip, however it doesnt seem to be working and i cannot see any error messages.
I have attached my sip.conf
debug = 9
sip debug is on
show si...
Elastix 0.9.2-4
Behind Firewall
Ports 5060 tcp/udp are open
10000-20000 tcp/udp are open
I can not get my sip account to register. I clearly must be missing me something.
This is what...
I'm trying to get this T1 card to work. The drivers are loaded properly, but I can't place any outbound calls.
I'm running a clean install of the newest version of Trixbox.
When I dial ou...
Hi I am using Asterisk 1.4 and there is no iLBC on it..server is CentOS 4.5 Final. As per
http://www.voip-info.org/wiki-iLBC
2008-04-02 - iLBC no longer included with Asterisk source (1....
Hello everyone,
I had incoming calls working fine with my BroadVoice account and Asterisk 1.6.0-beta9. After making several test calls, I now get a busy signal when I try to call in. I've m...
Hi
i am having in issues in getting the DTMF signalling. asterisk is not getting the correct DTMF . like
* DTMF-relay event received: 1
* DTMF-relay event received: 1
== CDR updated...
I can load the drivers ok:
modprobe zaptel
modprobe wcfxo
modprobe wcfxs
but then when I run /sbin/ztcfg -vv, I get:
root@UbuntuBox1:/etc# /sbin/ztcfg -vv
Zaptel Configuration
=...
We are in need of an inbound IVR Software tool (for asterisk/trixbox) that will help us create survey campaigns. Specifically, people will be calling into a our number and will be presented ...
Hi,
Just wondering if anyone has successfully deployed an Asterisk phone system with Cisco Router QoS?
What how did you tag the packets in Asterisk and what did you use on the Cisco router?...
