Does anyone know if it's possible to remote control a Cisco IP Phone 7945/7965.
We are using CUCM v7.0
I found this link from another solution but the program is old and doesn't seem to wo...
Hi all,
I am having problem forwarding all calls to a external number. Here is my setup
CSICO 3640 (ISDN lines) -> CISCO 2811 (ip phones 7960)
when i set the "call forward all 90208XX...
I want a few phones to all ring at once if number associated with a certain FXO port is called. What is this feature called and can you point me to its configuration? Thanks.
Hello all - I am moving my BES to another box and our previous admin did not do a very good job of documenting our environment. Needless to say, is the license for the BES install kept in a t...
I'm looking to get the Remote Server Administration Tools (RSAT) for Windows 7. I'm running Windows 7 RC x64. I've downloaded both of the files from Microsoft's site (http://www.microsoft.co...
hi all i have E1 isdn line and the calles go throught with no issues but the i get unknown number when i call from my mobile. i also tryed to call from pstn line and i still get unknown number...
I am having an issue with the Internet Authentication Service. I have a RADIUS server configured for access with my Cisco VPN and the service will not stay started. I have attempted to start...
Is there any small IP telephony or small PBX out there that can filter incoming calls just like an ACL on a router would do for incoming data? I would like to block certain NPA-NXXs. Better ...
Hello,
I have several i2004 IP phones which are not able to connect to our BCM 400 and download the latest firmware. A lot of Nortel documents reference the configuration of a TFTP server dur...
Let me start by saying I am not a telephone guy. I know just enough to get myself in trouble. That said, I recently added a conference bridge to my NBX V3000 system in SIP mode and it seems ...
I'd like to know if there are some compatible avaya softphones running on linux, and in particular for ubuntu.Thanks
Need assistance routing calls from the ip phones > call manager > to the pstn .
Here is how it is layed out
pstn > router with fxs/fxo > switch > call manager server and IP phones
con...
Hi there!,
I have a rather weird issue which I cannot find on Cisco's support page or documentation of the phone.
Once i power the phone on (either from PoE cable or power adapter), all ...
Cisco 2811
IP Phones 7940
NM-16ESW-PWR
VIC2-2FXO
WIC-ATM-DSL
What I Want to do is to have a config where I can do calls from/to internal extensions using IP Phones and also with them, ...
Hi All,
I have an Aserisk server that is running a couple of internal extensions and also trunking calls through to MyNetFone (just a standard SIP provider). I have all the trunking working...
we have a small site with 6 phones using Cisco UC520, what I need to be able to do is be able to divert the main no to a mobile number, I currently have 3 phones in huntgroup, and i need to be...
I currently have an extension 9332 on my Cisco Communicator softphone. That is reachable via a SIP trunk or from other phones registered on the Call Manager Express. I want this phone to rin...
Hello all,
I have had an account with Broadvoice for some time now, and I am able to accept > 2 incoming calls through Broadvoice to my Asterisk server.
We had the need for a MeetMe conf...
We have some mitel 5220's running off our 3300 switch -
We have a handset and a headset plugged into the back of the phones. Unlike the rest of our phones (5224's, 5340's) the 5220's do no...
Hi we have Avaya IP Office at my work. We use the software manager 6.0 .
I am trying to look into a log to see who keeps calling a certain number but I have no idea where to find an outgoi...
I need to add an expansion module to a 7965 phone. I added the expansion module on the device profile but don't know where to program the buttons of the module. We have a Call Manager 6.0
I Have configured the unified call manager server route pattern using 9.@ , I need IOS commands for my gateway router to route calls over the fxo to the pstn.
The server and router use H.323...
Hi Guys,
Im gonna ask a reali strange question, i currently have agreemnets with VOIP carriers to be able to offer cheap telephone calling as myself @ whole rates.
And i can also allocat...
I have setup 2 general delivery mailboxes for about 4 users each. I would like them to have their message waiting indicator light on when a message is left. Im not sure if this is possible. ...
Hello,
We are running Cisco CallManager 5.1 with three call centers using Cisco Customer Response Solutions (CRS).
Each center is setup as a team. Then agents assigned to a team..
Is...
