We have a Cisco Callmanager 5 cluster that we are looking to upgrade to the latest version of callmanager 6.1.
1. Are there any gotchas we should be aware about?
2. How does it work with ...
I currently have a nortel BCM 400 phone system and to my understanding it has both regular and VoIP functions. Does anyone know where I can find good documentation on how to create extensions ...
we have just setup a sip trunk with a friendly provider but despite the IPO receiving the SIP INVITE it doesn't accept the call, the logs suggest URI mapping but I cannot see whats missing.
...
we are running CentOS ans Asterisk on Dual Proc 3.0 GHZ machine , we are currently experiencing system slow downs. Is this cause of High Load average?
top - 10:26:58 up 20:55, 5 users, lo...
I need to upgrade the firmware for a Cisco 7940 in Cisco CallManager 6.1 Linux addition. I need access to the tftp directory, however I cannot ssh into the linux distro and not sure how to adm...
Hi,
We are a small business with 15 employees and are recently reviewing some offers to upgrade our old Panasonic PBX to a new one. We have 14 employees in our main branch and another emplo...
I am trying to connect a 1230 IP phone to a BCM 400 system but am missing something. I have manually configured the phone with a static IP address and set the S1 to the BCM 400 system using po...
Hello,
I'm not sure I entirely understand how BLF functions on the Cisco 7931G phones with Cisco CME.
We are a small business striving to give a human response to every call (we don't use ...
I recently set up an IP PBX With trixbox. Everything is running fine from the cards to the phones. I have two phones that connect to the network and are running ok. the problem is that when i ...
I want to be able to attach to a specific extension to monitor using ChanSpy, right now I have to press * to skip through channels to the desired one. This is what I have in my extensions.conf...
Installing a new Cisco 2851 router with CME v4 I can dial internal but cannot receive or make calls to the outside world, when I pickup the phone I get dial tone I press 9 for outside Line I g...
Hello,
Im having problems getting some cisco IP phones to perform a consultative trasnfer , specifically 7912's the multi button phones seem to work fine, just not the 7912. When i call in f...
Hello,
I was trying to use retrydial, but did not get the result I expected so I started writing the following code but it doesnt work, it never shows the noop(${dialstatus}) or anything aft...
Greetings !-
I have a Freepbx (v2.4) pbx connecting to Junction Networks through a PSTN gateway. I have configured the Outgoing and Incoming Routes as well as an extension. I have succes...
We have a small LAN based on SBS 2003 at one main site, with a few remote workers logging in using RWW.
We are just about to implement an IP PBX, so we can use softphones or "phone companio...
I have two Office Server 7200 IP/Hybrid PBX connected via two Cisco 1800 (Private Site to
Private Site). I mean LAN to LAN via WAN (192.168.1.XXX to 192.168.2.XXX) My WAN link
provider, s...
We are using Cisco callmanager 5 in the UK with an MGCP gateway connecting to the PSTN via an E1 PRI.
The problem is, whenever we make a call and check the codec being used, it says it is u...
I am currently running a BCM 400 and have installed teh Nortel BCM Element Manager. I am i the process of creating a new extension I went to Telephony | Sets | Inactive DNs and edited one with...
How is the Cisco Call Manager configured to support third party SIP or H.323 endpoints/ phones? I have a customer that is using Cisco Call Manager v5.1 with Cisco Skinny phones. I would like ...
i read some articles and i get to know that software based pbx we can create unlimited extensions.
how does it works? does it create a virtual port for each extension or is it hardware based?...
I'm an application developer and software analyst who has been called into a job to fix an IP PBX. There is a Cisco 2610xm router connected to the PSTN -- On the other side are two servers. On...
Does anyone have any opinions about which is better and why?
Cisco call manager 4.1.(3) sr4d and unity 4.0(5) is having problems when a caller calls and gets transfered to an extension. The operator gets the call and transfers it to the person that the...
If you go to Preferences/User - there is a check-box: Enable Logging. This is for troubleshooting the Cisco IP Communicator voice issues. Where does this logging go??
