Silas2
asked on
New Install - No MeetMe
I've just done a clean install, Ubuntu 11.xx, asterisk 1.8.xxx., and the MeetMe throws up 'Applciation not found'
I'm reading about selecting make menuconfig in the asterisk src folder.
I'm a bit mystified, if I run this command, I just get a console list, not a UI to select apps I want.
Can I run this command, together with a make install after asterisk is already made/installed?
I'm reading about selecting make menuconfig in the asterisk src folder.
I'm a bit mystified, if I run this command, I just get a console list, not a UI to select apps I want.
Can I run this command, together with a make install after asterisk is already made/installed?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Then you are on the right track trying to compile Asterisk with such module.
ASKER
Will I need the zpdummy timer thing if I run that app_meetme install?
ASKER
My asterisk is only sip-sip, no zaptel loaded.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Sorry to be so helpless...I run these sudo apt-get install libnewt-dev + libnewt0.52, they seem to install, I then cd /home/silas/Downlaods/aste risk-1.8.6 .0 (src folder) run make menuselect, but I don't get your pretty UI, just this:
silas@silas-Asterisk:~/Dow nloads/ast erisk-1.8. 6.0$ make menuselect
CC="cc" CXX="" LD="" AR="" RANLIB="" CFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent " nmenuselect
make[1]: Entering directory `/home/silas/Downloads/ast erisk-1.8. 6.0/menuse lect'
make[1]: Nothing to be done for `nmenuselect'.
make[1]: Leaving directory `/home/silas/Downloads/ast erisk-1.8. 6.0/menuse lect'
CC="cc" CXX="" LD="" AR="" RANLIB="" CFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent " gmenuselect
make[1]: Entering directory `/home/silas/Downloads/ast erisk-1.8. 6.0/menuse lect'
make[1]: Nothing to be done for `gmenuselect'.
make[1]: Leaving directory `/home/silas/Downloads/ast erisk-1.8. 6.0/menuse lect'
make[1]: Entering directory `/home/silas/Downloads/ast erisk-1.8. 6.0'
Terminal must be at least 80 x 27.
menuselect changes NOT saved!
make[1]: Leaving directory `/home/silas/Downloads/ast erisk-1.8. 6.0'
silas@silas-Asterisk:~/Dow
CC="cc" CXX="" LD="" AR="" RANLIB="" CFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent
make[1]: Entering directory `/home/silas/Downloads/ast
make[1]: Nothing to be done for `nmenuselect'.
make[1]: Leaving directory `/home/silas/Downloads/ast
CC="cc" CXX="" LD="" AR="" RANLIB="" CFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent
make[1]: Entering directory `/home/silas/Downloads/ast
make[1]: Nothing to be done for `gmenuselect'.
make[1]: Leaving directory `/home/silas/Downloads/ast
make[1]: Entering directory `/home/silas/Downloads/ast
Terminal must be at least 80 x 27.
menuselect changes NOT saved!
make[1]: Leaving directory `/home/silas/Downloads/ast
ASKER
Doh, sorry about that, I hadn't run ./configure in the src folder, its giving me the UI now.
ASKER
Still no MeetMe applcation, I'm up to:
Dahdi installed make/install/configure all run (i think ok)
I put load => app_meetme.so in modules.conf
i run 'make menuselect' in /home/silas/Downloads/aste risk-1.8.6 .0, the app_meetme has an asterisk next to it, (I did nothing to do that) so I guess that means its installed.
But....I run 'core show applications' in the CLI and no MeetMe????
Dahdi installed make/install/configure all run (i think ok)
I put load => app_meetme.so in modules.conf
i run 'make menuselect' in /home/silas/Downloads/aste
But....I run 'core show applications' in the CLI and no MeetMe????
ASKER
Moved on, a bit...I've got the MeetMe app! (although the * was in the box in MenuSelect, I needed to run 'make && make install' as per this post http://www.spiration.co.uk/post/1317/No-application-'Meetme'-for-extension---Asterisk)
So MeetMe is firing, but I'm getting:
Parsing 'etc/aseterisk/meetme.conf ', app_meetme.c, Unable to open DAHDI pseudo device', and it bombs out. I've googled it, but I only comes up with mostly with permissions, I'm not really enough of a linux guy to work out what's needed, any idea?
So MeetMe is firing, but I'm getting:
Parsing 'etc/aseterisk/meetme.conf
ASKER