we have cisco 7941 and 7961 IP phone. how can I change the background banner or wall paper on the phone? Or changing the logo on the cisco IP phone 7941 and 7961?
My company wants to start using Skype. We initially want to set up 8 pcs for 8 concurrent connections. What would be the total bandwidth requirement for all 8 concurrent sessions?
I am trying to implement VoiP on Cisco Phones.I am using Cisco 2600 Series routers as end routers and the ISP router is also a cisco 2600 series router.
...
I support an office with an Avaya Ip Office, and Phone Manager Lite installed on each XP machine. V 4.0.20
They want to be able to dial a contact in Outlook 2007.. (the right click Dial Conta...
Hello,
Can someone please answer the following 4 part question for me. Can someone tell me in detail:
1. What an outbound SIP trunk is?
2. How are they used?
3. How do I get SIP trunk se...
I have a nortel IPT system and am in the process of setting up QOS. So my network topology is like this:
I have 3 floors of a building:
Floor 28 - 4 - 3650s and a 4507R
Floor 29 - 4 - 3650...
Quick question for you CM and CME experts.
I have a Cisco UC 500 device running Call Manager Express. My question is - is CME capable of sending a voicemail to e-mail as an attachment that...
I'm currently sending dial commands through the Asterisk API and I'm passing variable called dialed which is the number for that phone call and want it to show up in the CDR logs created. If I...
I need to setup QOS for Avaya 9600 series phones. I have all the phones separated from the data network using 802.1q on the router. I now need a good example of how to setup QOS.
Hello,
OK, here it goes..
We are installing an Avaya IP Office in our main building(Building A). We have an office in a building 500 feet away (Building B). We have installed a 2 point to ...
I would like to load a custom bitmap image into the 7971G IP Phones connected to our Call Manager 5.1 Cluster. What are the image requirements and how do I upload the image to the phones ?
We currently have a NEC NEAX 2000 (Site 1) serving our executive office with over 150 phone/fax lines being served via the PBX. This is currently sitting on a standard T1. We have a co-locatio...
Hello,
can someone help me straighten out these asterisk errors I am having with my provider. I have all my sound files in GSM format, and when making calls I get these errors randomly. I'd l...
We are putting a VOIP system in and I am confused on what POE switch will work with the Cisco 7960 phone. i am not sure if we are getting just the 7960 or the 7960G but i can make sure to get ...
Hi All,
Does anyone know how to tie a huntgroup pilot number to a pickup group? I have configured a hunt group for our accounts deptartment with a pilot number of 400. I then want people in...
Hi,
I am having trouble configuring a 7940G to connect to my 2800 Call Manager Express.
I am getting an error on the phone saying "Protocol Application Invalid". I think this might have s...
Hello,
How do I detect if a user has hung up. Basically I have an application which uses asterisk to originate phone calls, I want to add something to the dialplan, that captures when the rem...
I'm working at headquarter and we're running CUCM 6.0. We also have a small branch office that's running CME 3.1. Both offices/gateways are communicating just fine. We want to start moving ...
Using SIP, alaw/ulaw.. I want to be able to send faxes.
I found SpanDSP to be the best soft-fax out there that can work with Asterisk. SpanDSP/rx_fax/tx_fax are installed, and integrated with...
Hello,
I've just started using Skype for voice calls and I have had several people report to me that my microphone setup on my computer makes it sound like I am in a well (understandably s...
I am trying to setup a lab for myself in order to take my ccvp tests and of course get to know the cisco voip., so I am pretty new to this. I need some information about what would be the best...
Hello,
Can someone please tell me in laymens terms what an inbound route is, how its used, and what their purpose is?
worth 500 points.
Thanks,
Rick
I'm working out of a small business with only 1 phone but I would like to have what i think is called an automated attendant. Press 1 for this press 2 for this and press 3 to call my cell phon...
A client of mine has moved premises and his servers and incoming PSTN phone lines are installed in a building a short distance from his new offices. The network connection between the two buil...
I have implemented TrixBox. We have 4 extensions, 3 incoming PSTN lines on a Digium TDM400.
The extensions are currently using xLite softphones.
Everything is working - we can answer inc...
