Anybody know where i can find a paper version of manuals for IP Office and Voicemail Pro?
Hi all,
I work remotely for an office in New York that recently provided me with a Polycom SoundPoint 501 SIP phone that I've setup to connect to their PBX server through my Linksys WRT54G ...
In a building we have Voice VLANs with Voice traffic segregated from data but PC is daisy chained to the VoIP phones.
We are planning to implement 802.1x for both Data and Voice but unlike ...
We currently have Cisco Callmanager 5.0.4 and Unity. Is there a way to setup a queue for calls to go to when a particular extension is busy?
We are a company of roughly 100 employees. We use Cisco Call manager and Cisco IP phones. We're connected via MPLS. We'd like to integrate video conferencing. There will likely be only a f...
I have implemented TrixBox. We have 4 extensions, 3 incoming PSTN lines on a Digium TDM400.
The extensions are currently using xLite softphones.
Everything is working - we can answer inc...
Hello,
How do I detect if a user has hung up. Basically I have an application which uses asterisk to originate phone calls, I want to add something to the dialplan, that captures when the rem...
I need to setup QOS for Avaya 9600 series phones. I have all the phones separated from the data network using 802.1q on the router. I now need a good example of how to setup QOS.
I am trying to setup a lab for myself in order to take my ccvp tests and of course get to know the cisco voip., so I am pretty new to this. I need some information about what would be the best...
We have configured a trixbox server and it is all running fine as far as receiving and making calls, however we can't get the DID to work. When you ring a DID number, it rings through to the f...
I'm working at headquarter and we're running CUCM 6.0. We also have a small branch office that's running CME 3.1. Both offices/gateways are communicating just fine. We want to start moving ...
Using SIP, alaw/ulaw.. I want to be able to send faxes.
I found SpanDSP to be the best soft-fax out there that can work with Asterisk. SpanDSP/rx_fax/tx_fax are installed, and integrated with...
CAn you guide me please to a good article that explains the difference between H264 and H263?
Hello,
I've just started using Skype for voice calls and I have had several people report to me that my microphone setup on my computer makes it sound like I am in a well (understandably s...
our company is migrating from old to new network infrastructure and deploying IP telephony on large scale in migration all the users residing in 172.16.x.x are to be moved to 10.x.x.x network...
Hi All,
I have acreated an extension(5678) in extensions_custom.conf in order to record voice message and play it again...Everything is working fine if you dial the extension number from ano...
Hello Experts,
I have couple of point to point serial links (IPLC) from US to India on which we are forwarding calls. Sometimes the call quality deteriorate due to CRCs on one of the lines...
In the attached file I got confused to what I have found : is two different figures from two different sites
http://img214.imageshack.us/img214/4282/fxoandfxsciscoandpbxlw5.jpg
From the...
Hi,
I am running Trixbox 2.2.4 and I want to configure it so that each night at say 2.00am it reboots itself. How do I configure this in linux?
Thanks
Mark
We use the GXP-2000 phones which we are very happy with apart from for a couple of users which need to use headsets.On the GXP-2000 the mic was distorted and the headset volume low on an old u...
Hi All,
Does anyone know how to tie a huntgroup pilot number to a pickup group? I have configured a hunt group for our accounts deptartment with a pilot number of 400. I then want people in...
an anyone provide a Voice Port configuration for an FXS port for a Fax in Cisco Call Manager Express 4.3?
I have a Fax machine and and configured the dial peer etc:
voice-port 0/2/0
no...
Right now, my company has two telephone that act together to handle the volume of calls that we receive and to provide some level of redundancy.
I have 6 100 digit DID blocks between the s...
Hi All
Can anyone provide me with personal experience on any STUN/TURN products they might have used. I do prefer Open Source products
Thanks.
Hello,
Can someone please tell me in laymens terms what an inbound route is, how its used, and what their purpose is?
worth 500 points.
Thanks,
Rick
