Hi All,
I have a quintum tenor 960 cms, I am using it for testing and I am reading the manual. Can someone explain to me the difference between a DS1 and DSP card?
From my own reading, D...
For the last month I have been struggling with an intermittent performance problem.
When the problem arises, the CPU is 100% occupied and the system gradually dies. Rebooting usually fixe...
I have a Cisco ATA and an account with sipgate and blueface. Is there a gateway that I an use with both? Either provider do not know.
Thanks.
i have MCU server 3510 and Gatekeeper on 2800 series router .
I am unable to register remote client H.323 client. Kindly help it.
the problem is with the incoming call from FXO, if the outside user stop calling the phone number after only two rings the CME still holds the call and keep ring even thought the caller has hu...
We have a Cisco UC500 device that has been setup for voice only. Out of the box, this product (acting as DHCP server) will give out a VLAN100(10.1.1.0/24) for voice and VLAN1(192.168.10.0/24...
We have purchsed a new Cisco 3845 Integrated Router for our VoIP system.
I have searched Cisco Web Site as well as here and am unable to find instructions on how to upgrade Cisco CME to 7.1
...
I need the AT&T long distance call detail of my Cisco IPT system to show the number that dialed outbound, and I know there's something I can do to NOT make it show the generic phone number (24...
Hi experts, I want to know who exactly use asterisk? I mean who are the users of asterisk?
Can some one plz give a detailed answer? I am confused by reading on asterisk.org.
phone calls are completed just fine, from the cisco softphone to an external mobile phone, and the mobile phone can hear the caller, but when he speaks no sound is getting through.
problem ...
I'm trying to set up a firewall so that we can allow our SIP server to take incoming phone calls. I've been told to open up ports 5060 - 5070 UDP, and ports 8766 - 35000 TCP / UDP to the back...
Is it possible to configure a Cisco 7940 phone to auto-dial an extension as soon as the handset is lifted? I want to set up an after hours guest phone where someone not familiar with our phone...
I want to configure Quality of Service for my Cisco VOIP. I have a Cisco Call Manager Express / Unity Express on a Cisco 2801 Router. I am using a Cisco 2651XM Router for the connection to m...
Hi all
This is a question about running a phone through my internet connection
I have a 10 MB down 6MB up wireless internet coming into my home and then I have a gigabyte LAN set up intern...
I'm trying to record custom prompts for a Cisco IVR system and I'm not finding anything on how to accomplish this using the IP Phones like Cisco's documentation vaugely mentions. I found docu...
Our company has been running a Meridian system since 1990. We are looking at replacing the system and going VoIP. We have over 50 users throughout the US. We pretty much narrowed it down to...
Hi there,
Is it possible to apply any security mechanisms to MeetMe conferecing in CUCM, i.e. PIN access? This is primarily for external calling parties to a MeetMe conference number. Also...
Hi-
I work for a company that provides fully-furnished & serviced office space for lease. We have about 85 offices and (I believe) the equivalent of three T-1 Internet connections (sorry I kn...
If we have 73 people using IP phones (connection to VoIP service outside LAN), 100 people using internet browsers, plus other typical internet traffic; how much down/up bandwidth do we need to...
Good day
I have an IP Office 4.2. I have an extension/user setup with a voice mail box that I need to disable. I went to the user tab, found the user and then went to voicemail and unch...
Hi,
I need some help Configuring the Cisco Unified Call Manager 6.0 Lab here are few of my questions
1) what topology do you suggest, I am thinking Router (interface pstn)> Switch > Unifie...
Hello,
Could I ask how I can access the log files on my Cisco 7941. The phone is not registering with my SIP provider and I would like to see what the phone is doing and any responses back ...
Hello,
I am new to Cisco phones within the last week and im trying to learn fast. I am trying to set up a Cisco 7941 phone. I have successfully flashed the phone with the latest SIP softwar...
Hi,
I am looking for guide for installing auto attendent IVR.
I have the following: Call manager express router with cme 4.1
unity connection 6.0 server.
Thanks for your responses.
We have a call center with ONLY VOIP service. The manager (located at a remote location w/access to local LAN) is trying to find out if he/she can be able to listening/records live calls for...
