Need to make a RJ-48C cable for T1 point to point.
I searched via google buy only gave me advertisements of actual cables to buy.
I make rj-45 cables myself, now I need to lean how to make a RJ-48 cable.
The better the guide is the better is leanring process aslo. So please help me here.
Thank you all!
This Question has been solved and asker verified All Experts Exchange premium technology solutions are available to subscription members.
Experts Exchange has been collecting answers to technology questions since 1996…3 million and counting! If you have a question, chances are we already have your answer.
If you can't find the exact answer you're looking for, ask our exclusive community of 50,000 experts. You’ll get a personalized answer from a trusted professional.
Thousands of free tech tips, tricks, how-to’s and tutorials are available in our peer reviewed articles section. See for yourself how smart our experts are, no login required.
Save solutions to your questions, answers you’ve discovered through searching plus helpful articles in your personal knowledgebase for easy future access.
Access the answers to your technology questions today.
30-day free trial. Register in 60 seconds.
Members of the expert community talk about why the experience at Experts Exchange is different than what you will find anywhere else.
Try it out and discover for yourself.
30-day free trial. Register in 60 seconds.
Join the community of experts here and help other tech pros by answering question in your area of expertise. You can earn FREE access to all Experts Exchange's premium features and resources.
hi RobWill
I need a dummy wiring guide like for rj-45 straight-through
wires for end one of the cable:
1)orange-white + 2)orange + 3)green white + 4)green + 5)blue white ++ 6)blue ++ 7)brown-white + 8)brown
wires for end two of the cable:
1)orange-white + 2)orange + 3)green white + 4)green + 5)blue white ++ 6)blue ++ 7)brown-white + 8)brown
thanks
Hi CobolGuy9. I understand the problem. Though I have installed a couple of the cables I have never looked at the pin out. I suspect the equipment end could vary from manufacturer to manufacturer. The T1 end (as in the links) would be constant. The ones I used came with the equipment. The only option I could suggest is to look at the equipment documentation to see if it will tell you which pins are transmit and receive and then match them up to the other end as in the link. Seems to me the equipment end can be different connectors, RJ-45/48, or serial/RS232. Don't quote me on it but I thought the RJ-48C' & S's were straight through cables when using matching ends.
This is a pretty quiet topic area. I would recommend you post a 20 point "pointer" question in the router TA. There are several experts there who are very familiar with T1 installations. I am not at all. If you can catch the attention of lrmoore or one of the others, I am sure they can steer you in the right direction.
--Rob
1 Receive Ring
2 Receive Tip
3 no connection
4 Transmit Ring
5 Transmit Tip
6 no connection
7 no connection
8 no connection
since you're only using two pairs it doesn't really matter on the color scheme, so for example you might use
1) green 2) green-white 4)blue 5)blue-white
and it'll be the same on the other end. the only thing you want to watch our for is, what robwill noted, you might be going from a punch-down that has an RJ-45 but your device needs an $J-48C in which case you need some form of adapter.
This site has excellent diagrams and explainations for Straight-Through and Crossover Ethernet as well as the standard T1 crossover.
http://www.jaredsmith.net/
Business Accounts
Answer for Membership
by: RobWillPosted on 2006-05-02 at 20:18:16ID: 16592803
Are these of any help:
http://www.arcelect.com/RJ
http://www.la-cable.com/te
http://www.cisco.com/en/US