[x]
Posted via EE Mobile

Search, ask, and monitor your questions on the go with EE Mobile. Visit Experts Exchange from your mobile device and never be out of touch again.

09/16/2008 at 09:54AM PDT, ID: 23735819
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

6.7

Need Help Setting up QoS on a Cisco Catalyst 2950

Asked by jonske01 in Voice Over IP, Network Routers, Network Switches & Hubs

Tags: Cisco Catalyst 2950, Cisco Catalyst 2950 Version 12.1(13)EA1b, Need Help Setting up QoS on a Cisco Catalyst 2950

In this environment there is a Cisco Catalyst 2950 which needs to have QoS implemented on it as there will soon be VoIP traffic traveling on it.  I have implemented and verified QoS settings, etc. on all devices except this Catalyst switch.  The IP Phones will mark the voice packets with a DSCP of 46.  The phones do not mark any other fields such as the CoS, IP precedence, and so on.  With that said, any packets which traverses the switch with a DSCP of 46 need to receive priority over all user traffic.

Below youll find the Version, CoS and DSCP mappings (should be 5-to-46 and 46-to-5), and the running configuration.  I started to setup the WRR queuing, where a CoS of 5 is put in the highest priority L2 Queue.  However I do not have a good comfort level with this switch.  

Please let me know if you need more information
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:
132:
133:
134:
135:
136:
137:
138:
139:
140:
141:
142:
143:
144:
145:
146:
147:
148:
149:
150:
151:
152:
153:
154:
155:
156:
157:
158:
159:
160:
161:
162:
163:
164:
165:
166:
167:
168:
169:
170:
171:
172:
173:
174:
175:
176:
177:
178:
179:
180:
181:
182:
183:
184:
185:
186:
187:
188:
189:
190:
191:
192:
193:
194:
195:
196:
197:
198:
199:
200:
201:
202:
203:
204:
205:
206:
207:
208:
209:
210:
211:
212:
213:
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(13)EA1b, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 15-Apr-03 12:25 by yenanh
Image text-base: 0x80010000, data-base: 0x805A8000
 
ROM: Bootstrap program is CALHOUN boot loader
 
cisco2950 uptime is 35 weeks, 6 days, 20 hours, 42 minutes
System returned to ROM by power-on
System image file is "flash:c2950-i6q4l2-mz.121-13.EA1b.bin"
 
cisco WS-C2950-24 (RC32300) processor (revision L0) with 20839K bytes of memory.
Processor board ID FOC0802T188
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)
 
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0F:23:0B:66:40
Motherboard assembly number: 73-5781-12
Power supply part number: 34-0965-01
Motherboard serial number: FOC08021VFX
Power supply serial number: PHI075106PG
Model revision number: L0
Motherboard revision number: B0
Model number: WS-C2950-24
System serial number: FOC0802T188
Configuration register is 0xF
 
cisco2950#sh mls qos maps dscp-cos
 
   Dscp-cos map:
       dscp:   0  8 10 16 18 24 26 32 34 40 46 48 56
     -----------------------------------------------
        cos:   0  1  1  2  2  3  3  4  4  5  5  6  7
 
 
cisco2950#sh mls qos maps co
cisco2950#sh mls qos maps cos-dscp
   Cos-dscp map:
        cos:   0  1  2  3  4  5  6  7
     --------------------------------
       dscp:   0  8 16 24 32 40 48 56
 
cisco2950#sh run
Building configuration...
 
Current configuration : 3233 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname cisco2950
!
aaa new-model
enable password 7 0110120D0253
!
username admin password 7 094F5A00405D
wrr-queue cos-map 1 0 1
wrr-queue cos-map 2 2 3
wrr-queue cos-map 3 4
wrr-queue cos-map 4 5 6 7
ip subnet-zero
!
spanning-tree mode pvst
no spanning-tree optimize bpdu transmission
spanning-tree extend system-id
!
!
interface FastEthernet0/1
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/2
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/3
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/4
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/5
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/6
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/7
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/8
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/9
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/10
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/11
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/12
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/13
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/14
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/15
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/16
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/17
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/18
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/19
 switchport mode access
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/20
 switchport access vlan 10
 switchport mode access
 no ip address
 duplex full
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/21
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/22
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/23
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface FastEthernet0/24
 no ip address
 mls qos trust cos pass-through dscp
 spanning-tree portfast
!
interface Vlan1
 ip address 10.0.0.22 255.255.255.0
 no ip route-cache
!
ip http server
!
!
line con 0
line vty 0 4
 password 7 070C35451751
line vty 5 15
 password 7 070C35451751
!
end
 
cisco2950#
 
Loading Advertisement...
 
[+][-]09/16/08 02:25 PM, ID: 22493444

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]09/20/08 06:54 PM, ID: 22532867

View this solution now by starting your 30-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zones: Voice Over IP, Network Routers, Network Switches & Hubs
Tags: Cisco Catalyst 2950, Cisco Catalyst 2950 Version 12.1(13)EA1b, Need Help Setting up QoS on a Cisco Catalyst 2950
Sign Up Now!
Solution Provided By: lrmoore
Participating Experts: 1
Solution Grade: C
 
 
[+][-]09/22/08 04:53 PM, ID: 22545350

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]10/02/08 05:11 PM, ID: 22629872

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
 
Loading Advertisement...
20090824-EE-VQP-74 / EE_QW_2_20070628