Link to home
Create AccountLog in
Voice Over IP

Voice Over IP

--

Questions

--

Followers

Top Experts

Avatar of wilderstein
wilderstein

Enable igmp snooping on 3500XL 12.05)
Trying to enable igmp snooping on a 3500XL 12.0(5) switch.  

when I enter ip igmp snooping, I get invalid input.  
When I enter ip igmp ?, I get ambiguous command.
 When I enter ip igmp, I get incomplete command.   (!)
When I enter sh ip igmp snooping, I get invalid input.
 It doesn't recognize snooping...

Zero AI Policy

We believe in human intelligence. Our moderation policy strictly prohibits the use of LLM content in our Q&A threads.


Avatar of harbor235harbor235🇺🇸



switch> enable (may be prompted for a password here)
switch# config t  (enter config mode)
switch#(conf) ip igmp snooping
switch#(conf) exit   (exit configuration mode)
switch# wr mem    (saves config)

harbor235 ;}

Avatar of wildersteinwilderstein

ASKER

Hi:

That's what I did.  I was in config mode.
Gives me invalid input at "snooping"

Avatar of harbor235harbor235🇺🇸



What type of image do you have EMI or SMI?  Check by doing a show version

harbor235 ;}

Reward 1Reward 2Reward 3Reward 4Reward 5Reward 6

EARN REWARDS FOR ASKING, ANSWERING, AND MORE.

Earn free swag for participating on the platform.




#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5.3)WC(1), MAINTENANCE
 INTERIM SOFTWARE
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 30-Apr-01 07:51 by devgoyal
Image text-base: 0x00003000, data-base: 0x003331F4

ROM: Bootstrap program is C3500XL boot loader

ernie uptime is 10 weeks, 6 days, 5 hours, 21 minutes
System returned to ROM by power-on
System image file is "flash:c3500XL-c3h2s-mz-120-5.3.WC.1.bin"


cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes
 of memory.
Processor board ID FAB0537M1GX, with hardware revision 0x00
Last reset from power-on

Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)

Avatar of harbor235harbor235🇺🇸



The 3500XL switches do not support igmp snooping. Here is the link;

http://www.cisco.com/en/US/tech/tk828/technologies_white_paper09186a00800a85d1.shtml

harbor235 ;}

Really.  I've been instructed to turn on multicasting throughout the network.  I've got the 6506 and 6509 multicast enabled.  What good will it do if I can't do igmp snooping on the switches?  They are all 3500 or 3500XL.  Just got in some 2960s.  Any work arounds without replacing equipment?

Free T-shirt

Get a FREE t-shirt when you ask your first question.

We believe in human intelligence. Our moderation policy strictly prohibits the use of LLM content in our Q&A threads.


ASKER CERTIFIED SOLUTION
Avatar of harbor235harbor235🇺🇸

Link to home
membership
Log in or create a free account to see answer.
Signing up is free and takes 30 seconds. No credit card required.
Create Account
Voice Over IP

Voice Over IP

--

Questions

--

Followers

Top Experts

Voice over IP (VoIP) is a methodology and group of technologies for the delivery of voice communications and multimedia sessions over Internet Protocol (IP) networks, such as the Internet. Other terms commonly associated with VoIP are IP telephony, Internet telephony, broadband telephony, and broadband phone service. The term specifically refers to the provisioning of communications services (voice, fax, SMS, voice-messaging) over the public Internet, rather than via the public switched telephone network (PSTN). Examples of the VoIP protocols are H.323, Media Gateway Control Protocol (MGCP), Session Initiation Protocol (SIP), H.248 (also known as Media Gateway Control (Megaco)), Real-time Transport Protocol (RTP), Real-time Transport Control Protocol (RTCP), Secure Real-time Transport Protocol (SRTP), Session Description Protocol (SDP), and Inter-Asterisk eXchange (IAX).