Link to home
Start Free TrialLog in
Avatar of ahmzb1990
ahmzb1990

asked on

Skype connect with cisco call manager

Hi

We are looking to connect our existing cisco call manager 7.1.5 to Skype connect sip . As a trial we have already created a Skype connect account and purchased a few concurrent sip lines. Can any guru out there please advise step by step to create a sip trunk/ or whatever is required to get this service working?
Any help will be greatly appreciated
Avatar of R_Edwards
R_Edwards
Flag of United States of America image

If i remember correctly version 7 does not directly connect with skype to sip, you will require a border element (CUBE) to get it to work, i may be thinking of 7.1.3, but i am 90% sure that all version 7 will not connect directly.

-=Richard.
I did some searching on the CISCO site, and although i did not find call manager to sip, i did find CME to Skype, the commands may be sililiar, and i am hoping thy work for you.

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml

good luck

-=Richard
Avatar of ahmzb1990
ahmzb1990

ASKER

Thanks for your response. I am looking at doing this all within the GUI of call manager. I am happyvto look at the cube option but wheredoo I setup/install cube?
ASKER CERTIFIED SOLUTION
Avatar of R_Edwards
R_Edwards
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
I've requested that this question be closed as follows:

Accepted answer: 0 points for ahmzb1990's comment #a39260861

for the following reason:

thanks