When plugging a Cisco 7940 or 7960 into the new UC500 it sits at Configuring CM List
Hi,
My company is looking to get an Avaya IP Office 500 phone system, and although we have been told we would need Layer3 switches to use IP phones (we wouldn't be using the phones over the...
I have a customer with two offices, each with ADSL connection (2400kbps/330kbps) and each with it's own Draytek Vigor 2900 VPN router. A site-to-site VPN is in place and the company has cont...
I want to add a "Line 2" to a 7940 VoIP phone thru Cisco CallManager 4.1.
This is on a Cisco MCS 7825 series server running Unity (4.0.5) for Exchange. This problem originated as a long (5 to 30 second) delay when accessing voice messages via the phone (i.e. not via...
I have two Linksys RV042 VPN Routers in place; one at home, one at work. I have them both setup and working great my VPN is connected 24x7 and I can access all network resources both directio...
After a lot of static showed up, only on my end, whether a call was made, or received, I noticed that my faxes were not going through or coming in any more. The static problem has been fixed, ...
On a Cisco Phone 7960 with multiple lines on the buttons, only the first (primary) line is allowed to be used with the CFwdAll template button. Is there any way to enable this behavior for the...
Hi all,
My question is related to attended transfers using Asterisk and Polycom IP Phones and EyeBeam Softphone as user agents.
As I could understand, looks like after each REFER, Aste...
Hi
I have a Zultys MX 250 IP PBX running on software version 2.0.10. And I also have Cisco IP phone 7940 and 7905 that is SIP aware.
I am able to get the phone to point to the MX 250 ...
i currently have three locations in which operations run out of. In the newest location we have just finished deploying a cisco voip system. Call manager is located in this building. The ot...
hello,
im having problems cancelling audio feedback in a voip application:
does anybody know of any sources or snippets in 'C' for algoritms
to handle this situation... the voip applica...
Does anyone know if the DLink DVG-1120m is able to be configured/administered from a remote location like many routers? I'm trying to help my mom configure her's to allow Remote Desktop Connec...
When I try to run reports in CDR Analysis and Reporting I get an error code 30061 for all reports I try to run. The services are running but ever since I ran a purge of the database I get thi...
We have installed a Cisco VOIP system to replace out old PBX. Overall we are very happy, but we have a nagging problem.
We interfaced our old analog phones. modem lines, and faxes to the n...
Can Anyone recommend a good billing system for prepaid phone services...where a call comes in and is routed to a line that pays for the account...
And will terminate them if their account is ...
I just bought one to use for my VOIP system. I need to find someone that can assist me with configuring this gateway.
do you know which one is the best IP Phone system.
15 extension and 4 co lines required.
thank you.
I have a bunch of 7960 sip phones connected to a asterisk with regular lines connected via FXO modules to my phone company. Now people using the sip phones can hear themselfs while they`re tal...
I am designing a network for a small company that wants to use a hosted IP Centrex solution. There will be five Polycom or Cisco SIP phones growing to fifteen in two years. Computers will be...
