We are moving buildings and consequently looking to move phone carriers. We are in contract with our current phone company but are looking to prepare for the future in our phone service. We ...
I am running Asterisk@Home, Asterisk v1.0.9
I have a TDM11B (1FXO 1FXS).
My ZAP extension belongs to group 1, the number is 200
My ZAP trunk belongs to group 0
I also have an IAX2 ex...
Lets say I have 4 people on a phone call at once in my office for example? Thanks experts.
Hi,
I'll be involved in installation of a few polycom ip phones on an Interactive Intelligence platform (www.inin.com) and I want to save myself some time in provisioning these phones.
1...
Hi,
I have a WPU-7700 wireless phone which I want to get working with a Shoretel 8.1 phone system. Anyone got any experience doifng this?
We have a Cisco Callmanager Express system. It has a VWIC 1MFT-T1 that connects to the PSTN via a PRI circuit. The main problem is caller-id. The Telco says that they are sending the name o...
Hi All,
Just configure QoS across 2 Cisco routers to mark the IP precedence 5 bit in the packet headed. Whats the easiest way to check if this is working and that the IP precedence bit has ...
Hi Experts,
Apart from 555 which gives me random extensions to listen to, is it possible to add another number we can dial that will only listen to a certain extension? Need this for trainin...
We have Call Mgr Express connecting straight to a PRI. We are trying to switch to a new "Flex T-1" that has only 10 voice channels (1-10). When we plug the new circuit into the Call Manager ...
Dear All,
I just have started in a new company which has tried to set-up in a quick way VoIP in order to avoid to buy a PBX.
we have therefore:
1 1.2MB xDSL Line connected to the prov...
We have a Chatty Cathy that management would like me to track phone calls to and from and duration. We have a Mitel 3300 Switch and she has a Mitel 5330 IP Phone. I know how to check the cal...
We just got a Cisco UC500 system with 3 phones , but we are new to the VOIP. We have plenty of expertise in IT ( data)
Currently we have 3 analog lines coming to our office and we do not h...
Environment:
Catalyst 3750s and 3560s
Multiple data VLANs, dedicated voice VLAN
Polycom IP phones, support CDP
Questions:
1. Given a single switch port configured for both an access...
I am looking for some recommendations for Asterisk hardware. I have been following Asterisk for some time now and we will be rolling it out to our office as well as several client offices in ...
Hello,
I am trying to re-flash a Cisco 7911 phone. Does anyone know once I have re-flashed it with the latest firmware whether I can use the same configuration file i used to configure my 7...
I am trying to put a voip softphone on my pc. I currently have an avaya ip phone, but I want it to be virtualized. I have tried all kinds of differnt programs but none seem to work. Someone...
Hi,
In my Cisco 2811 router i am running 12.4(20T) IOS and i have the following cads attached:
VIC2-2FXS
VIC2-2FXO
PVDM2 8
Right now i am using this router to route the outbound cal...
i have put the XXXXs in here just to hide the real #. i must be doing something fundementally wrong. basically 9+11 digit dialing is working, and also 411 is working.
10 digit dialing is no...
Good Afternoon,
I was hoping someone could assist me with setting up QoS on my 14 Cisco Routers to support VoIP. I have a 14 site MPLS cloud that passes data and VoIP voice. The pipes to ea...
I have a customer looking for a way to run 200 Polycom SIP phones on a CISCO CallManager. I have heard of others doing it with gateways and a SIP proxy? Can someone advise?
I have a Brand new Cisco 7940 IP Phone. I have just signed up for RingCentrals program that gives information on setting this phone up. The information Given to me is as follows:
SIP Domain...
After speaking to many people and trying some different solutions, there seems to be differing opinion on the best answer to my question.
I am looking for the best router / firewall combina...
How would one go about prioritizing voice traffic on an etherchannel interface on a Cisco 3750?
I'm not sure of SRR can be applied on an etherchannel interface, or if its better to apply it...
Does anyone know of a TAPI based program that will display caller-id on the computer screen using Cisco Callmanager Express 3.3 with Cisco 7940 IP phones?
The client wants caller ID to pop-...
Hi Everyone,
Can somebody please tell me how to configure a H323 gatekeeper on a Qunitum Tenor DX. I just need my H323 client to be able to register with the Quintum so that I can make call...
