Hi,
I have a client who has about 7 x Siemens Optipoint WL2 wireless VoIP handsets configured to talk to a Siemens HiPath system (I dont have any experience with Siemens kit) - or much experi...
I need to block some phone numbers from calling my office number. How can i achieve this. my office uses cisco call manager 4.3
I need to add custom options to a predefined DHCP scope for our Mitel
phones on Windows 2003 server. I can go into 'Set Predefined Options...'
and see and edit all the options, I can then ti...
I have a Cisco CME running SCCP with a few phones located across an Internet L2L VPN. The Internet router at the main site is an 1841 with a high bandwidth cable connection. I have successfu...
I have two small offices and I would like to have telephone 'extensions' both ways. Simply, POTS phone at office 1 to POTS phone at office 2. The 'PBX' at each location have POTS extension por...
Hi everyone,
I am 24 hours away from deciding on VoIP versus PBX. I like all of the features of VoIP and the configurability as well as the fact that communication technology seems to be mo...
Hi
I have installed an 4-fxs/did card into a cisco 2801. I have attached a phone to one of the interfaces and can make calls on that phone to IP phones in the office however when I try to c...
I have a grandstream 2020 and an asterisk aa50 box.
Trying to setup the xml phonebook download.
ive enabled the download option on the grandstream 2020.
address ive set as
www.myweb...
We are planning to purchase 48 Cisco IP-phones and WS-C2960-48PST-L, and connect 48 ip-phones to the one box, but Following cco url states....
"the Cisco Catalyst 2960-48PST-L configurat...
Windows 2003 Ent x32 SP2
IBM Lotus Domino 8.0.2
Domino Unity Connect 1.2.5
CISCO Unity 7.0 upgraded from 5
We recently updated our Domino and Unity servers to the versions shown above.
...
My company is building a new Corporate office, and is wanting to purchase a new phone system to replace our existing Nortel/Meridian implementation
I am looking for Pros and Cons and Buying...
Dear Experts
Is there any free solution to enable Blackberry Mobile to use SIP to connect using my Cisco call manager 6.1?
Please note that I have Blackberry Enterprise server version 4.1 ...
I just installed a Cisco IP Phone 7960 on my CUCM 7.0.1. The phone works fine, but has the incorrect time on it. My Call Manager is set to the correct time and all other phones have the corr...
Hi
I have a problem with my cisco unity voicemail, the time stamps on the voice mail on the phone are one hour off the normal time. Cisco unity is running on windows 2003 and it shows the r...
.....although I hear the test message [Tel."sipgate" 10000] which says that the phone is now correctly configured and I've received mobile voice box messages as well........
when someone cal...
Hi
i have a linksys router and a vonage router -- the linksys is first -- and i would like to plug the vonage into the linksys?
How do i configure the vonage ?? It has a place for my st...
I need the ability to connect remote phones to my NBX 3000 that resides withing my LAN (LAN1) behind a PIX 506e.
Steps that have been taken:
NBX configured with external IP address
P...
Need to make a RJ-48C cable for T1 point to point.
I searched via google buy only gave me advertisements of actual cables to buy.
I make rj-45 cables myself, now I need to lean how to make...
How do we reset the enable password on a Cisco UC520?
I have Cisco 7940 phones operating over our corporate WAN/LAN with a CCM Publisher v 4.1 server.
We are currently in pre-configuration / training for a rollout in nine days time.
One q...
I'm managing a Cisco VOIP system with CUCM version 6.1.2. I've inherited the system and only know my way around the phone level.
Our default Caller ID (or should I say External Phone Number...
Hello,
I am interested in:
-connecting 3 houses with few Cisco IP phones in each
-the connection between those houses needs to be via the internet
-the internet is reached by ADSL/CABLE mo...
My company has its offices in 2 cities, both these offices are connected to the internet through their respective ISP, Internet is through DSL (512Kbps), both the offices have static ip's conf...
Hey I'm trying to run VoIP through an Ipsec tunnel and use QoS. It seems to be working. But I'm still getting bad quality. Does any one have any ideas, or is it working correctly? Here is the ...
We've just configured a Cisco UC520 system with 12 7940 phones at our new office, and are trying to get them all to ring on incoming calls to the main number. Does anyone know how to do this?...
