I am running Cisco Unified Call Manager 6.1 and everything is working great; I have about 70 Cisco 7941 and 7961 Phones deployed.
I need to know how to register a non cisco phone running S...
How do we upload an image (company logo) to the Cisco 7945 IP Phone so that users can go into Settings, User Preferences, Background Imaages and select the company logo as their image? Also, i...
I'm running a registry mechanic for the first time. I expected quite a few errors, but over 11,000! It's centered around this Wow6432Node.
The first time I ran the scan in seemed to be hung...
Hi guys,
I've successfully installed a CCM cluster for 1400 IP phones for 4 locations.
However, I have an issue what I cannot solve.
The end user would like to change their personal setti...
Am I able to configure Call Manager software to block the phone extension of an outgoing call? (example: from a Collections department)
I have a Cisco Cat 6509 with PoE ports. I'm connecting Avaya 4620 IP phones and need to know how to configure the switch ports. PC's will be connected to the 4620's as well.
Voice VLAN = 2
...
Hello everyone,
Recently, perhaps within the last 30 days, I've been having problems with using Skype with my USB7100 phone.
In a predictable manner, I am only able to make one successfu...
I need to block some phone numbers from calling my office number. How can i achieve this. my office uses cisco call manager 4.3
I'm working on an Asterisk system and I'm finding that the maximum number of incoming calls on any channel is 6. I need this channel to communicate with a conferencing system with over 20 sim...
We have these Cisco 7941 VoIP phones at work that are part of a call center setup that we have with a service provider. Each phone has a designated extension programmed into it. However, whe...
Hi, I'm trying to get a VIC2-FXO card to work with a cisco 1760 and im not sure how to set it up on the router. I'm trying to get it to work with a cisco callmanager server. Does anyone know a...
Need detailed information on how and what I need to setup push to talk on a Cisco 7921 wilress phone using Cisco's Unified call manager version 6.1.1.2000-3.
OS: CentOS 5
Asterisk version: 1.4
Asterisk server IP: X.X.X.X (public IP)
X-lite IP: 192.168.10.1(private IP)--behind NAT
I am trying to configure asterisk with X-lite using broadvoice ...
Hi,
I'll be involved in installation of a few polycom ip phones on an Interactive Intelligence platform (www.inin.com) and I want to save myself some time in provisioning these phones.
1...
Until recently, we haven't really found a need to subnet or otherwise segment our small office network. We have Catalyst 3560 switches and a CAT 6 infrastructure, but aren't really utilizing ...
I am trying to change the display names on phone screen and the users' caller ID but I can't seem to get it to work no matter what settings I change in CallManager, please help.
Does anyone have experience with Avaya IP Softphone 6 on Vista? I have version 6 SP 4 installed on my XP machine, and it works fine. I installed it on my Vista machine, and it will not connect...
I'm looking at VOIP solutions and have a couple of questions:
My company has about 50 users and my MD wants to look at using 'SKYPE' to make calls to cut costs.
We would be calling other Sky...
Considering the "diagram" in the code snippet:
Is it possible to throttle the bandwidth on the SonicWALL (to say 1Mb?) and thus leave 500Kb always available to the VoIP network?
I have Nortel Phones (i2004) running over a Cisco Network (catalyst 4500 Switches). I want the phones to use a dedicated Voice VLAN. But when the phone boots up, it obtains an address from the...
The clock appears set fine in IOS and in the switch service module. (See below). But the phone's time is off by six hours ahead. I've rebooted the phone and it's still way off. To what is i...
hi folks,
I have a conference bridge in a secured datacenter which receives VoIP/SIP calls from public internet. we recently changed firewall from an old/simple netscreen to a newer Juniper...
Hi:
Does someone knows about a Cisco Call Manager simulator I can download?
Thks!
Danny
We use the builit-in Nokia N95 SIP client to connect to our asterisk sip server for voip calls. Within around 5 min after the N95 registered the sip server, it could answer incoming call. H...
Hi
I have installed cisco ip communicator on my laptop, I have configured in cisco call manager, all is fine but when I ring from my communicator I do not hear anything on my usb headset, I ...
