Hello
Some service are required only for a period of time so they start and stop. That cange can be normal after an SP or KB.
For more info look here http://www.eventid.net/dis
For the starting error , that need a closer look on your controller (see if you have some problems with the disks) and can "say" that one of your disks will fail in short time.
Dan
Main Topics
Browse All Topics





by: athavasiPosted on 2009-09-17 at 20:10:56ID: 25362711
further to add, server has got two hard drives and mirrored,
yesday i did a windows update and after that i gave a restart .. for 5 times windows server 2003 didnt load the OS , came up with windows\system\config file was missing or corrupted. it ask to repair with orginal cd .
i removed hard drives from slot and put it back on the same slot where it was previous .. and then gave a power on , and it loaded windows server 2003 , then from this morning am getting the above messages in event viewer 7035 and 7036 ..