I need a list of all networking commands - ie ping trace route - and any other commands that will come in usefull - i need the command and a discription and what the command does - and any oth...
Write a program that finds and prints all of the prime numbers between 3 and 100. A prime number is a number such that one and itself are the only numbers that evenly divide it ( e.g., 3, 5, ...
1) How can I get the IP address of a network printer residing in our workgroup? I am trying to map this printer from a Linux machine and need the actual tcp ip address.
It's WIN address is \\J...
I ran the IE 6 upgrade program yesterday, and now cannot connect to the internet.
I have tried everything I can think of.
Problem system is on a home network.
Removed and reinstalled the ...
Hi All
I have an Acer Laptop that can not connect to the internet (wireless) as is sais that the dependancy service or groups failed to start. After some investigation I logged in with the hi...
Hi.
Running win 2000.
I have a customer who has a Netgear DG834 V2 Modem Router.
My predecessor made some configuration modifications, and (wisely ?) changed the entry Login and Passwords. ...
I HAVE MDAEMON MAIL SERVER SOFTWARE . I WANT TO CONFIGURE 2 LOCAL ACCOUNTS. I HAVE CREATED TWO ACOUNTS.
TO READ THE EMAILS I USE OUTLOOK EXPRESS. I HAVE CONFIGURED THE NEW ACCOUNT BUT I DO...
I have an old Dell Latitude CPi laptop computer. I am not an expert in computer hardware but here is what I see on Device manager under 'Other Device' which says Ethernet Controller with a big...
We have a network of W95 PCs and an NT server. An ISDN router connects us to the Internet.
We only use the TCP/IP protocol, and allocate IP addresses using DHCP.
The DHCP server and a WINS s...
I asked this and awarded a solution, but after all was said and done, I jumped the gun and ended the question before the network was up and running. The solution was perfect, but there must ha...
Hi Experts,
I work for a dental office with 9 windows XP workstations and 1 2003 Server. These workstations have scanners/cameras hooked up to them so they can take an xray of a patient and...
I have two connections to the Internet. One Linksys router is set up as 192.168.1.1 and services my "Intranet" (i.e.--supplies outbound internet access to most of my computers. The second li...
Hello!
I have a Microsoft Windows 98 network with a printer server. All devices have static IPs. In Windows you can simply add the printer by choosing "network printer" and selecting "\\<prin...
I recently set up a small LAN:
two WIN95 computers.
Both have the same ethernet card - Linksys 100tx 10/100 base-T.
I found when I installed the card and setup all the network stuff, My...
Hi
Can anyone shed some light on this,
I have got IBM x series , windows server 2003 std edition ,
From yesterday onwards i am getting logical disk mgr and virtual disk service has ...
i have a computer in my college lab. the ystem Admin actually given network connection on 2 pcs out of 10 pcs. he also configured yahoo messenger on those 2 pcs. we all students then enable ...
I have a network card the takes the BNC type connector. Where can i get a adapter the converts a BNC connector to a RJ-45 type connector?
Do they still make these connectors ?
Also, once i h...
I can't see Windows 98 as a 'Topic Area' - I hope this area will be OK.
I am setting up a network. My main PC uses XP Pro. I installed a netgear GA311 Ethernet card, connected to a Netgear...
Recently the server started crashing and rebooting at times once a day. I ran pstat. exe Here is the file. Can someone please assist me?
Pstat version 0.3: memory: 2096440 kb uptime: 0 2:...
I am trying to set my PC up as server to a new Samsung LCD TV using "SAMSUNG PC share Manager" and I am continually getting the error message "Your request cannot be completed because the Wind...
Get this error all of a sudden on boot-up. Can't aviod it even with boot disks.
Himem.sys is there.
Changed memory, hdd, and pulled all other components.
Tried multiple bios settings.
What...
Hello,
Is it possible to use the #include command in a hosts file? I see the command documented in a LMHOSTS file but not the hosts file. I am trying to include a common hosts file fr...
I am trying to connect to a remote computer using NetBIOS
over TCP/IP on a Windows 95 machine. If it matters, I am
connected via a cable modem and receive an IP from a DHCP
server.
The on...
From the desktop on a windows 98 computer, how do I get to the command prompt so I can do an ipconfig? I need to get the IP address and computer name directly from the command prompt.
I have six computers in a lan connected peer to peer running windows 95. For the network I have the Netbui, IPX and TCP/IP protocols running. I use the computers to access the Internet acros...
