I was asked the above question in an interview.
Any idea?
Thanks.
PRO008E:Invalid decimal digit in PROTOCOL.INI file
Error loading device driver PROTMAN.DOS
Error 7306: The driver fail to initialize
The NIC Model is 540TX & have loaded it with the proper ...
What is a subnet? How are they determined?
I'm running a NT Network system, I know that if I have the IP number I can find the MAC address by using the ARP command. How do I find the IP Number if all I have is the MAC Address?
I just wonder if someone can tell me if there is an existing shareware that can resolve IP addresses by giving the Mac Address as reference?
I have a VPN that uses DSL routers to connect a remote office to a Windows NT LAN using TCP/IP. The DSL routers are connecting at the two sites and I can ping a machine on the remote subnet f...
I doubt this can be done with iis4/NT dns, but here goes.
I run my own web server and DNS server. I already have www aliased to the webserver, which goes to the main directory. Now, i wan...
I have a small peer-to-peer network with a Win98 machine as server. One of the machines is running NT 4.0 SP6 Workstation and is to act as my RAS server. I have installed RAS service ans start...
Below is the advice I got recently on how to bypass the logon screen. However, this seems to only work right after I make the changes in the registry. (i.e. after I make changes, I exit rege...
PDC on subnetA. BDC on subnetB. This BDC is also the RAS server.
Subnet B is a secondary interface on a Cisco router port. SubnetA is the primary.
Every 36 minutes the BDC logs event ...
We configured in outlook the services "MS Exchange Server" as well as private Internet-Mail Accounts.
Everything (sending and receiving) from all accounts work perfectly, but the users are no...
We have a NT domain and users configured to use roaming profiles.
On a specific Workstation with a CD Writer, I would like all the users to be able to log on the domain but I don't want their...
I get this error when booting nt. How do I fix it
This is a second try. The previous time I screwed up my W2K server I just
re-installed it from scratch and the problem no longer matched the original
description.
I've setup a home netw...
Does anyone know the if there is an LDAP search filter string syntax for searching on a multivalue attribute? If so, what is it? I don't see it in RFC2254.
What is VLAN.How it works.Why it is used for.Any example to explain the use of VLAN.?
hi,
Does anyone can tell me,how can i get the ARP Cache Information at the my computer with Windows NT.
thks in advance...
Develop toolkit:Visual C++
Platform: Windows NT SP4
No DDK...
I have two NT4 standalone servers servers, connected over a TCP/IP network, I need to be able to run remote updates upon a database on the other server, these updates will be automatically run...
Is there any program that can test firewall security on most current security hacking method ?
I'm using Veritas' Backup Exec 8.0 with it's most current build. I have it on an NT4 server with sp6a. Here's the problem: EVERY backup that runs will freeze right in the middle and crash the ...
i'm new to windowsNT version 4.0,, this was seen on the Event Viewer
Event Detail:
Crash dump is disabled ! NT failed to initialize the boot partition paging file to crashdump. This may...
I'm running Arcserve 6.61 on NT 4.0. The logs indicate that my backups are running fine but when I go to do a restore I can't expand any directories. The root drive is there and if I run a res...
I would like to know if anyone has a method to map a network drive using the following syntax and then change to the drive that was assigned by the wildcard?
The batch file would be somethi...
Hi guys.
I have one NT 4.0 DNS Server. Currently when I monitored thru Event Viewer, it diplayed messages as stated below:
1)DNS Server encountered bad packet from 192.5.5.241(root ser...
Hi sirs,
Recently have a problem with a multihomed server(with 2 nics) acting as a router between 2 subnets. I installed RIP for IP in the Network Properties and checked the Enabled Routing...
