I am running Microsoft SBS 2000 with > 100 GB of storage and wish to perform routine backups to another off-site server connected thru a VPN tunnel.
I am looking for an off-site backup sol...
Hello,
I have a Win2K (w/SP3) running ISA (w/SP1) that once a day stops passing traffic to the Internet and either has to be rebooted or will clear up after 25 minutes where it will ask use...
so lets say there are 120 computers. there is a windows 2000 server domain controller, and there is a user account called student which is a domain user account. is there a way to make that do...
I have a very specific requirement to resolve NetBIOS names to IP addresses. More specifically, usernames are registered with WINS by the messenger service for use by the "NET SEND" command. ...
I'm trying to connect a linux box to a freshly installed Windows 2003 Server. I shared a drive. From my XP workstations I have no problems. If I try to connect from linux I see this:
root@m...
hi,
i have a problem with getting citrix and AD to run fast enough
on my VSAT connection. On researching it seems like there are
issues with TCP when running over high capacity long...
I have just a 2000 server running as a router with nat.
I have to disable the lan connection before the wan connetion will acciess the internet.
after i disable it i can access the internet ...
Hello,
A customer is using exchange server. They want to have a secondary mx record, in case the exchange server goes down. All mail will then be sendt to our mail server. When the exchange ...
Hi,
I have setup two sites: one is location1.vah.com , the other is location2.vah.com .
In location1.vah.com, I have setup users and scripts, etc. I want location2.vah.com to use ...
Hi guys,
I am trying to backup the exchange server mailboxes in my Exchange server, which is also the DC of my network.,
But everytime i start the backup. i reciev the error, "Unable the att...
Hi, I'm creating a vbs script that uses WMI, to copy an OCX file from the network and into the winnt/system32 directory. The problem I'm having is trying to figure out how to get the script to...
Hi all.
I know my problem could be very simple but I've tried several ways and I've not been able to get a solution.
Here are the facts:
I have a lap and a pc connected via a small sw...
Hi,
I have noticed that all PPP/SLIP adapters seems to get 00-53-45-00-00-00 as their MAC-address. Is there anyone that can explain me why and preferably direct me to some documentation on ...
Hi,
Trying to add a new XP PC to an existing 98/ME network but no luck. Any advice gratefully received. Existing Network:
Main Gateway -> Internet
==================
Windows IP Conf...
We are getting over 300 new laptops soon that will be running Windows XP Professional and do not have floppy drives. We have Symantec Ghost Corporate Edition 7.5.
In the manual, a floppy d...
This one, I can't figure out. I have a Win2K Server running Terminal Services. Connected to the outside w/a Netopia R-7100-C DSL router. Terminal svc works fine internally for several users...
I'm going to be deploying an Exchange 2000 server in a DMZ soon. Should I install the server on the DMZ then install the OS and Exchange or install OS and Exchange on the LAN then move it to ...
I've searched high and low but I've come up empty. How do you use FTP in Visual Basic 6 to send the full range of commands to an IBM Mainframe. VB's Inet only supports a limited range (e.g. ...
I'm in a fast ethernet network 100mbit, our new server came with a 1000mbit networking card built in. Now I need to add another NIC into it. Should I go with a cheap 100mbit NIC or should I ...
How can i stop duplicate ip address on our DNS server???
have a 2003 site setup with just one site server/management point. About
75% of my clients installed properly and are working correcty but about 25%
of them have a Locationservices.log fil...
I have a server running Windows Small Business Server 2003 and, of course, IIS 6. I am running in a domain called CGOC. I set up a website on the server and I can access ON the server, but any...
Hello
What is the best and the fastest way to copy 10GB over a network. (From a Windows 2000 Server to a Windows 2000 Server) ?
thanks
Network Layout Legend:
==> Direct Connect RS232
--> Direct Connect Cat5
== PCMCIA
// Integrated
))(( Wireless
Linksys AP, Bridges, PCMCIA
Dell True Mobile
Network Layout:
...
I inherited a preconfigured network with a HP netserver running W2K server. I just replaced 25 98 1st ed. clients with XP Pro on new boxes. After umpteen attempts I cannot get the XP's to jo...
