My Current wifi infrastructure exsists as follows:
WLC: 4402 IOS: 3.2.195.13 (Not sure about the upgrade options)
LAP: AP1010 (LWAPP)
LWAPP Transport Mode: Layer 2
What I am trying to go to is as follows:
WLC: 4402 IOS: 3.2.195.13
LAP: AP1010 & AP1131AG (LWAPP)
LWAPP Transport Mode: Layer 3
We had 19 AP's (AP1010) one went bad so we went to replace with a stronger model the 1131AG we ended up ordering the autonomous model and i successfully upgraded to a Lightweight version
did alot of research a troubleshooting my main issue that i realize is the 1131AG can only contect via Layer 3 currently the Controller is Layer 2
So I configured IP addresses on the AP1010 currently and set the WLC to master mode after reboot but i can't pick them up at all in layer 3 mode i can ping them but it doesn't show they have an ip address in the details list of the access points when they connect on Layer 2 (ap ip status disenabled). Thats my issue with the current AP1010
so with the 1131AG I get the following error
%LWAPP-3-CLIENTERRORLOG: Discovery Timer: found the discovery response from master controller
%LWAPP-5-CHANGED: LWAPP changed state to JOIN
%LWAPP-3-CLIENTERRORLOG: Join Timer: did not recieve join response (controller - DHO-4402)
%LWAPP-3-CLIENTERRORLOG: Set Transport Address: no more AP manager IP addresses remain
%SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET JOIN RESPONSE.
%LWAPP-5-CHANGED: LWAPP changed state to DOWN
So in the end my issues are configuring the AP1010 & AP1131AG to work on Layer 3 and not effect my current wifi implementation of guest networks and our internal staff network
Do i need to upgrade my Controller if so to what IOS Version.
This Question has been solved and asker verified All Experts Exchange premium technology solutions are available to subscription members.
Experts Exchange has been collecting answers to technology questions since 1996…3 million and counting! If you have a question, chances are we already have your answer.
If you can't find the exact answer you're looking for, ask our exclusive community of 50,000 experts. You’ll get a personalized answer from a trusted professional.
Thousands of free tech tips, tricks, how-to’s and tutorials are available in our peer reviewed articles section. See for yourself how smart our experts are, no login required.
Save solutions to your questions, answers you’ve discovered through searching plus helpful articles in your personal knowledgebase for easy future access.
Access the answers to your technology questions today.
30-day free trial. Register in 60 seconds.
Members of the expert community talk about why the experience at Experts Exchange is different than what you will find anywhere else.
Try it out and discover for yourself.
30-day free trial. Register in 60 seconds.
Join the community of experts here and help other tech pros by answering question in your area of expertise. You can earn FREE access to all Experts Exchange's premium features and resources.
Business Accounts
Answer for Membership
by: adrianjfxPosted on 2009-04-07 at 06:13:01ID: 24086926
NB: I did configure the DHCP Option 43 for the Aironet 1131AG should i do the same for the AP1010 but i gave them static addresses but didn't configure the primary controller i configured the ip on th AP 1010 via the WLC
below is a sample of what i statically did on my 1131AG
1131AG_CONF#sh lwapp ip config
LWAPP Static IP Configuration
IP Address 10.168.3.236
IP netmask 255.255.252.0
Default Gateway 10.168.0.1
Primary Controller 10.168.3.202