Hello,
After reading many posts about GPRS, I don't find the answer I am looking for.
I know that for making a GPRS conection I need the AT commands, OK.
But I don't have any idea how ...
how to dial a gprs modem using c#
hi,
my problem is to access an internet application with GPRS. I have an ericsson r600 phone connected to the RS232 port of my PC and i am sending AT commands from hyperterminal to the GPRS...
Hi,
I've purchased a new Nokia 6600 mobile phone and I've spent a lot of time searching for a solution to this. I want to Use my PC to access internet using the GPRS on my phone. I connect ...
Hello Experts:
Is there any software available which can convert the Dynamic IP address Provided by the GPRS service provide to Static? My problem is I want to integrate the web server with...
I am develloping in C (using Tasking compiler for C16x) a software which consist of data center ,for sending and receiving SMS per GPRS, and making distance diagnostic task. The idea of the ...
Hi,
I am using a Simcom 300 module to connect my PC over the GPRS to a remote server to send data. The PC would later be replaced by microcontroller based equipment for remote a monitoring ap...
Hi,
I would do the following :
1) Launch a timer
2) Open a PDP context
3) Make a series of requests
4) Close the PDP context
5) Stop the timer...
1, 3, 5 doesnt make any problem...
Hi! I'd like to ask what could I have been doing wrong since I can't seem to make the Nokia PC Suite work with my Nokia 6020 phone.
I have the infrared in my XP laptop and I have used it be...
hi all
just wondering, is there a simple sequence of AT commands to send a short text-only email from a wireless GSM module?
I've got the following so far to get a GPRS connection, but d...
I am writing a VB.NET application that will us a modem attached to a server to dial up a CDMA modem (Metrum) sitting in the field and send it AT commands to switch the modem from Dial Up mode ...
Hi,
I am using the Pocket PC XDA. i want to programmatically create a GPRS connection using VB.NET. Does anyone have any pointers?
Thanks
hi,
I want to send data using Gprs,ofcourse with AT commands.
AT commands;
AT+CGDCONT=1,"IP","uni.tim.it","0,0,0,0",0,0
AT+CGQREQ=1,1,0,0,0,31
ATD*99***1#<cr>
Now are the codes eno...
Any Experts Please Help!
I am using the following VB code in Window Mobile to download a 1M file from the web server. It works very fast on Wi-Fi mode, less than 5 seconds, using my code or ...
Hello all,
I have a Wavecom Fastrack modem and a GPRS line, running on a Windows XP system. I have tried some of the suggestions listed here but none of them worked as described.
Was abl...
Hi,
I'm building a little app, I've got a GPS tracking device (support SMS/GPRS) that I can configure with IP, APN and PORT# via SMS. The device will dump NEMA data via the IP/PORT/APN settin...
I have an embedded system with 16 bit MCU to control a Ericsson GPRS module that included TCP/IP protocol stack (GR47).
Is it possible to use this embedded system as web server?
If yes, how ...
Hi,
I wan't to Communicate my PC and Nokia 6210 modem by sending AT Commands through COM port. i'm using DLR-3. I have some AT Command's also.And i'm sure that using "AT Commands" can communi...
HI!
i have a problem. I want to make a gprs network and send and recieve few bits of data between two gprs modemes connected to a pc using ONLY at commands (these modems will be connected to ...
- We want to develop a J2ME based mobile product that is capable of running on all mobile phones that support java
- We expect this mobile application to establish the persistent TCP Socket c...
I have a Nokia 6620 phone from AT&T wireless that I am trying to get to work on the Cingular network. I have successfully unlocked the phone and have been using it for voice calls with no pro...
can anyone please tell me howto set up the GPRS.
I have a Wavecom GSM/GPRS modem i want to connect to the internet using this wireless modem.I have the GPRS account activated.My machine runs ...
Hi,
I am trying to establish a very simple socket communication betwen a client PC and a server PC.
The server has a direct IP on the internet, and is comprised of a vb application tha...
How we can connect to I-Mate JasJam GPRS device to PC having XP on order to brows internet.
Is it necessary to use LCP with PPP while dialing in a stand alone mode? I ask this because I have been working with a developer using a wavecom modem, who indicated that during the PDP contex...
