I have written two applications that communicate with each other via wireless GPRS. One of these applications runs on a Pocket PC under WM5 or WM6 and the other runs on a desktop. Both program...
Hi there,
I have been trying to get an MC75 Sharkpod modem to connect ot the internet. I can get it to send sms', but I can't get it to connect to the internet - or APN.
I have set up an...
Hi all,
I am very new to GPRS n all. My problem is I have to connect to a GPRS network through a Modem. I need all the information regarding this.
First of all what is the specific...
Hi all,
I connect to the internet using Wavecom FastTrack GPRS modem using Windows XP. I was able to send/receive SMS using AT commands via hyperterminal. I also setup a dial up neworking ...
hi everyone,
I am developing a GPRS application on ppc2002.i havent worked on GPRS before sending at commands at the hyperterminal is not working please help e throught this.
waiting in an...
Hello there,
I am new to GPRS and I am finding it hard to find enough information to get started properly. I have scanned quickly documentation for different GPRS modems and that doesn't se...
Hi all...
Ok, i'm able now to attach to PDP Context, Set the APN, and detach from PDP context... Thanks to Arvep...
The next step is the following :
How to make those http / FTP / an...
My mobile phone operator provides me with a _wap-over-gprs_ (not internet-over-gprs) service and thus I can only browse wap pages. On the phone (nokia 8310) everything works well, however when...
Hello,
I have a GPRS module running a simple socket application. I'd like my GPRS app to connect to a Java socket app running on one of our servers.
Could anybody shed some light as to ...
I have recently purchased a GPRS modem and a data only SIM card from vodafone. The initial plan was to set up a PC with the modem in a remote location and use remote desktop to connect to it....
i have mobile connect vodafone greece with gprs connection. i use skype very very bad quality. help please?
xp sp2 home edition
Hi,
I need to send data from microcontroller by email using GPRS. Does any one know where I can start from?
P.S:I can send the data from the microcontroller serially.
Thanx
Dear Friends
Could you please tell me about the following commands which have been used in cisco 2600 series for GPRS ATM? what it will do?
chat-script gprs "" AT OK AT+CGDCONT=1,"IP",...
(!!!Important)"AT"+"GPRS"==>"Internet" Only...
Dear All.
I'm interested in accessing internet from my microcontroller, or from a dumb Serial Editor (e.g. Hyperterminal) that means, I shoul...
Hallo every expert,
I´ve changed the initial configuration of my Modem of type Siemens MC 35T GPRS.
Now, I am looking for every suggestion such as an AT Command which will permit me to re...
Hello, I'm a portuguese student!!
I'm to try use GPRS connections in mobile phones with JAVA, for serie60 of Nokia.
But I'm a little lost.
I don't know how I test my applications, to see if...
Hi all,
I'm pursuing my Master in Communications and trying to decide on my thesis. I´m trying to establish a seamless roaming between GRPS and WLAN in a laptop (of course I would have a Wi...
Hi all,
I need to connect 2 uC's and both are connected via RS232 to an Enfora Spider SA-G modem. The uC's don't have any PPP stack. I just need to send plain ASCII information from on uC t...
I have read the answers send by drelectro, which are very detailes. Althiugh I need more specif programming tips.
I am trying to satrt the GM29 by using my personal SIMM card, first is this...
Hi,
We currently run a vehicle tracking application that uses SMS to send vehicle locations to a modem attached to a server on which I run a small SMS receiving application which in turn inse...
Hi,
Really i need am imediate help from you experties in my problem please. am trying to send files from a gprs modem to another gprs modem where are both connected to PCs. i want to kno...
1. Can I send data through TCPIP by just knowing the telephone number of GPRS mobile phone?
2. If not, how can I know the IP address of GPRS mobile phone for data transmission?
3. Or how the...
How do i go about starting an internet connection (GPRS) on a PDA running windows mobile 5 or pocket pc 2003 using visual basic?
What are the steps to be followed to provide a connection after the IP listen command AT*E2IPL=1,1,80,0,1? I have a Sony-Ericsson GR64 R2A GSM/GPRS modem module. This command opens a socket, b...
Hi
I have 2 x Telit GM862 quad py modems I can send and recieve SMS messages, I am do vehicle tracking. Too expensive to track in real time using SMS messages
I have the following questio...
