I have set up RADIUS for wireless on a Windows 2003 Std server. The server is also an Enterprise CA server but is not a domain controller. I have one RADIUS client, a Netgear WG302 WAP.
The p...
I am using Aironet AP1410 for connectivity and the buildings are 20km apart.
I can see the bridges are associated but on Root Bridge its giving me authentication failed message. I am attachi...
A client has a old linksys wrt54g (version?) router and a new wrt310n router. EIther one works as a basic router providing wireless access to internet thru a dsl modem (the dsl username & pw a...
Hello Everyone,
I am in the process of converting our office's wireless network to use 802.1x access control. I have everything set up and we are successfully connecting and using the ne...
I need to setup a RADIUS server for the wireless authentication and have no idea where to begin, even after reading http://www.windowsnetworking.com/kbase/WindowsTips/Windows2000/AdminTips/Sec...
I used to have an very good connection to the internet via my wireless router. However, in assisting a friend I hooked up their router to my system and ever since I reconnected my belkin wirel...
i make program to basetobase converter with (J2ME)
i want to make jar and jad file in order to be work in mobile phone
u can download the application from
http://www...
There are several other devices connected to the same wireless access point. Xp SP3 is not installed and i have removed the connection from the remembered list and started from scratch all res...
We recently purchased a couple of the new Cisco 1252AG Aironet APs (802.11b/g/n). They have separate 2.4 and 5Ghz radios.
Out of the box, they seem to have very poor range. I have the radio...
Hey experts,
I have configured by my mobile phone (Nokia 6600) to have a WAP connection by my WSP, and I put a WML file (actually an HTML file with WML tags) in the root folder of the IIS,...
Hello,
I had to reset my Linksys WRT160N router because I could not find the Wep Key that my brother created. I pressed in the reset button on the back of the router for 30 seconds so now it...
Hi!
What I have is a 3-storey building. Currently, my 802.11g signal barely makes it to the 2nd floor (I have a wireless router/modem on the ground floor).
I'd like to improve this and t...
Hello -
I have a simple netgear wireless router. One laptop connects fine. Another one shows Verifying Identity warning and doesn't connect for some reason. It does connect to another n...
Anyone know where can I download a free J2ME editor tools?
I know we can download JCreator for Java programming, but how about J2ME programming?
I have a cisco aironet 1130AG setup for authentication to a windows radius server. I have double checked the shared secret keys, but all I'm getting on my XP laptop is "Validating identity" I'...
I have a linksys wireless-N WRT160N broadband router that I am trying to configure. I have two problems:
- the setup software is failing to detect the router (I followed the steps shown by ...
I installed on a new machine, both Windows XP and Windows Vista 64bits (dual booting). I have a router configured with WPA security.
After installing the wireless drivers for the PCI wirele...
I purchased a Zyxel P-330W to remotely connect wired PC and a laptop in "wireless client bridge" mode to a 2Wire 2701HG-B that will be in my shop next to my house. I have tried to set it up, b...
Hey guys and gals, I need some quick but important help. I bought an internal wireless card for a customer's Toshiba Satellite model # 1415-S173. The wireless card is an Askey Atheros PA3233U-...
Ok my question might be fairly simple. I have one building with standard setup ( T3 , Cisco Routers, Switches ect.) Now I have until recently gotten by with a standard WRT54G router but we ...
I just installed a WRT54G2 to replace my WRT54G. It is connected to a DLink cable modem.
The install CD seems to work ok and I can connect thru it but when I try to access the router menu at...
I recently purchased a Lenovo T61 with pre-installed Intel 4965agn wireless card. Within a day, I was getting these 1802 errors when I booted up the machine. Something saying that installed mi...
My Current wifi infrastructure exsists as follows:
WLC: 4402 IOS: 3.2.195.13 (Not sure about the upgrade options)
LAP: AP1010 (LWAPP)
LWAPP Transport Mode: Layer 2
What I am trying to go...
Hi,
What is the difference between Infra red,Wireless Wifi and Bluetooth.
regards
Sharath
After I setup the security settings on the wireless G router, I was able to get a strong signal after connecting from my Dell Laptop's builtin wireless adapter software which display's the wir...
